如何显示跟随鼠标移动的图形？求助一个困扰了很久的问题

zg8312 · 发表于 2020-7-2 09:09:47

yangqi666 发表于 2020-7-1 23:34
噢噢原来是在XL下才会有这个选项，但是我看了下好像只是控制快捷键预览（提示）的。

打孔的时候孔的形状会根据金属宽度的不同也会跟着变化的！是不是很你想做有相似之处！

yangqi666 · 发表于 2020-7-2 19:28:21

zg8312 发表于 2020-7-2 09:09
打孔的时候孔的形状会根据金属宽度的不同也会跟着变化的！是不是很你想做有相似之处！
...

谢谢看到了效果了！不过我想找办法自己来做类似的功能，这样能把自己的脚本做得更加完善了。

Jen · 发表于 2020-8-7 14:18:45

Assuming you are talking about using an enter function (e.g. enterPoint, enterPoints etc), then you only have limited control over what they draw. So for example, enterDonut, enterPolygon etc do (by default) draw a ghost outline based on the points you've entered, but you cannot show the contents of an instance or something else at the cursor point as part of these. Support for that is done at a much lower level and there's not (as far as I know) SKILL support to do the same.