安装DC遇到问题

leoLD

新人按照教程来安装。license生成应该是正确的，sssverify显示PASSED       Integrity check report for license file "/eda/synopsys/license/synopsys.dat".
       Report generated on 20-Jan-2016 (SCL_10.9.3)
       ---------------------------------------------------------
       Checking the integrity of the license file....
       Valid SSS feature found.
       License file integrity check PASSED!

但是运行dc&，显示
       [ld@localhost ~]$ dc&
       [1] 16970
       [ld@localhost ~]$ Fatal: Design Compiler is not enabled. (DCSH-1)

运行dv&,显示
       [1] 16996
       [ld@localhost ~]$
       [ld@localhost ~]$ Unable to obtain feature 'Design-Vision ' because:
       Error: Can't communicate with the license server. (SEC-12)
       Please contact  at ld@(none), who is
       your local Synopsys license administrator for Synopsys site 000.
       Unable to obtain feature 'Design-Analyzer-DAP ' because:
       Error: Can't communicate with the license server. (SEC-12)
       Please contact  at ld@(none), who is
       your local Synopsys license administrator for Synopsys site 000.
       Unable to obtain feature 'Design-Analyzer ' because:
       Error: Can't communicate with the license server. (SEC-12)
       Please contact  at ld@(none), who is
       your local Synopsys license administrator for Synopsys site 000.
       Fatal: At least one of the following must be enabled : Design-Vision, Design-Analyzer-DAP, Design-Analyzer. (DCSH-10)

syn_lic.log显示
       (snpslmd) Licenses are case sensitive for TE_CATS
       (snpslmd)
       (snpslmd) EXTERNAL FILTERS are OFF
       (lmgrd) snpslmd using TCP-port 32918
       (snpslmd) Serving features for the following vendor names:
       snpslmd  CADABRA  EPIC  ISE-TCADd  TE_CATS  adalmd  anagram  archprod  avantd  chrysalisd  everest  hscd          innologd  la_dmon  leda  metasoftd  nassd  numeritchd  saber_dmn  sandwork  sigmacd  slat  snpsOEM1  snpsOEM2     snpsOEM3  snpsOEM4  snpsOEM5  snpsOEM6  snpsOEM7  snpsOEM8  snpsOEM9  ssilmd  synopsysd  tmald  vcsd
       (snpslmd) ------------------------------------------------------------------
       (snpslmd) Checking the integrity of the license file....
       (snpslmd) Valid SSS feature found.
       (snpslmd) The feature is needed to enable the other keys in your license file.
       (snpslmd) ------------------------------------------------------------------




.brshrc文件环境是
      #synopsys
      export SYNOPSYS=/eda/synopsys/dc2007
      export SNPSLMD_LICENSE_FILE=66666@localhost.localdomain
      export LM_LICENSE_FILE=66666@localhost.localdomain
      export PATH=/eda/synopsys/dc2007/binPATH
      export PATH=/eda/synopsys/scl/10.9.3/linux/binPATH
      alias lmli2="lmgrd -c /eda/synopsys/license/synopsys.dat -l /eda/synopsys/syn_lic.log"
      alias dc="dc_shell"
      alias dv="design_vision"



DC装的是2007,2010也试过，scl用的是10.9.3

daviehj

port有设正确吗？感觉根本没有向服务端申请license啊

leoLD

回复 2# daviehj

非常感谢，添加了串口之后能打开了。

登录/注册后可看大图

登录/注册后可看大图

daviehj

you're welcome

nba2k12

回复 3# leoLD


   请问你这个问题怎么解决的？ 怎么添加的串口？

nba2k12

回复 2# daviehj


   请问怎么解决这个问题？先谢谢你

luokaizai0

谢谢分享！！

deeeeepblue

请问你这个问题怎么解决的？ 怎么添加的串口？

samwell

:&!!!!

samwell

!!!!