【社会招聘】全球著名美资IC公司LSI上海研发中心2011年11月热招职位！！！

yulingyanyuyu

【社会招聘】全球著名美资IC公司LSI上海研发中心2011年11月热招职位！！！

LSI上海研发中心正在扩张，目前有很多职业发展机会，欢迎有志之士加入！有意者，请将简历发至：Tracey.zheng@lsi.com

如有任何疑问，请发送邮件至Tracey.zheng@lsi.com或拨打电话021-24191709.

也可加我msn: zql975504@hotmail.com

LSI上海研发中心位于徐汇区中山南二路徐汇苑大厦（8万人体育场对面）

1.

HDD Read Channel Architect-Shanghai

Job Description

- We are looking for an engineer with a track record of excellent performance to join our read channel architecture team. In this role you would be part of a dedicated team developing LSI's leading hard disk drive ASIC technology.

- This job spans the invention process from the conception of a new idea, through reduction to practice in software, close collaboration with design teams and verification of the design through to validation of performance through bench testing. In your role you will with work closely with Design and Verification teams in Shanghai and with the RC Architecture team in the United States.

- Our core requirements are a deep knowledge of digital communications technology; familiarity with detection and coding for magnetic recording; some experience implementing signal processing and detection algorithms in software and good programming skills in C/C++ and scripting languages. Experience with design verification and bench testing would both be very desirable.

Requirements/Qualifications (Education)

- PhD in Electrical Engineering or equivalent. Deep knowledge of the principles of digital communications. Familiarity with signal processing and programming

2.
Senior Custom Design Engineer -Shanghai

Job Description

- Candidates for this position should have experience in the design and design management of large, high-speed, mixed signal ICs.

- The designs must have contained a variety of both hard and soft-macro IP blocks.

- The candidate should be an expert in

all parts of the full-custom digital IC design flow from DSP algorithm or datapath architecture optimization for digital full custom design, to transistor level schematics design and optimization, SPICE simulation, DFT and test insertion, floorplanning, layout, circuit characterization, timing closure, signal integrity, power analysis and verification.

Requirements/Qualifications (Education)

- The candidate should have 3+ years of design experience. Full custom digital design experience on DSP algorithm based datapath with CMOS, Domino Logic, and/or CPL, is preferred. MSEE or PhD required.

3.
Verification Design Engineer-Shanghai

Job Responsibilities
Duties will include working with a Verification Team to develop reusable block and system level verification environment using high level verification language to support
ASIC development.
Review RTL architectural and implementation specifications. Develop test plan, create stimulus drivers, monitors, reference models, scoreboards, protocol checkers to verify
function and performance of advanced multiprotocol networking ASICs.
Define and develop application tests required to verify ASICs meet functional and performance goals.
Define and implement functional coverage plans.
Define and implement code coverage plans. Develop testing and regression
methodologies for new verification flow.
Coordinate test plan implementation and
regressions with remote team.
Incorporate reusability into all aspects of the verification environment.
Develop/maintain/enhance environment tools/scripts/makefiles.

Required:
- Minimum of 3-5 years ASIC verification experience in a product development environment
- Proven ASIC Design Verification skills
- Proficient with high level verification languages such as System Verilog and Specman e.
- Knowledge of data and telecommunication networking
- Proficient with one or more scripting languages, such as Shell, Perl and TCL.
- Superior debugging skills for large ASIC designs
- Strong written and verbal communication skills
- Adaptable to evolving customer requirements
- Experience in a lead position giving guidance to other engineers, tracking and overseeing development progress.

Education/Certifications:
Required Degree: BS
Preferred Degree: MS
Preferred Major: Electrical Engineering or related discipline

4.
Sr. Verification Engineer –Shanghai

Job Responsibilities

Duties will include working with a Verification Team to develop reusable block and system level verification environment using high level verification language to support ASIC development. Review RTL architectural and implementation specifications. Develop test plan, create stimulus drivers, monitors, reference models, scoreboards, protocol checkers to verify function and performance of advanced multiprotocol networking ASICs. Define and develop application tests required to verify ASICs meet functional and performance goals. Define and implement functional coverage plans. Define and implement code coverage plans. Develop testing and regression methodologies for new verification flow. Coordinate test plan implementation and regressions with remote team. Incorporate reusability into all aspects of the verification environment. Develop/maintain/enhance environment tools/scripts/makefiles. LSI Corporation is a leading provider of innovative silicon, systems and software technologies that enable products which seamlessly bring people, information and digital content together. We offer a broad portfolio of capabilities and services including custom and standard product ICs, adapters, systems and software that are trusted by the world's best known brands to power leading solutions in the storage and networking markets. We value the diversity of our people. LSI is an Equal Opportunity Employer.

Functional/Industry Knowledge:

Required: - ASIC Design and Verification skills and experience - Knowledge of high level verification languages such as SystemVerilog - Knowledge of data and telecommunication networking - Scripting skills, such as Shell, Perl and TCL - Good written and verbal communication skills Education/Certifications: Required Degree: MS Preferred Major: Electrical Engineering or related discipline

5.
Read Channel Verification Engineer-Shanghai

JOB DESCRIPTION:

As a member of the Read Channel team, candidate must be willing to work as an extended

member of the design team. Duties will include functional verification of Storage read

channel mixed-signal IP. Candidate will be expected to contribute to design and development

of System Verilog based verification environment and will be responsible for verification

closure of block/chip/system level functions for mixed signal based IP. Experience with

System Verilog and functional coverage methodologies are required. Must be willing to

follow a disciplined verification methodology and to work closely with a multi-location,

international design team. Excellent teamwork and communication skills are required.

PREFERRED EXPERIENCE:

BSEE with 3-5+ years of design and/or verification experience required, MSEE preferred.

Required knowledge and skills:

- Expertise in System Verilog required

- Good understanding of Digital Signal Processing

- Good understanding of Analog and Digital Circuits

- Very good analytical/debugging skill

- Good verbal and written communication skills

Desirable skills:

- Knowledge of Verilog-AMS, Perl

- Knowledge of verification methodologies including functional coverage and constrained

random testing

- Knowledge of VLSI design flows & DFT

- Familiarity of high level programming language

- Experience working with globally distributed team management

- Experience in Supervising and mentoring Validation engine

6.

Preamp Verification Engineer -Shanghai

Job Description

LSI Corporation is known worldwide as a storage market leader. Our silicon-to-systems solutions empower disk drives with the intelligence, flexibility, speed and reliability needed for high-capacity storage across every market segment, from portable consumer electronics devices to personal computers to enterprise-class storage systems and networks. LSI's Storage Peripherals Division is seeking an experienced verification design engineer to join the pre-amplifier design team. Preamp design team members define, create, modify and verify high-speed custom integrated circuits for hard disk drive (HDD) and tape recording products using leading edge CMOS and BiCMOS technologies

- Work with a Preamp Development team to create verilog testbench components and simulation environment.

- Create product test plans, test cases and perform simulation and debug of Storage Preamp mixed-signal devices.

- Must be experienced with Verilog and Verilog AMS and knowledgeable with functional coverage methodologies.

- Ability to follow a disciplined verification methodology and work closely with a multi-location, international design team.

- Excellent teamwork and communication skills are required.

Requirements/Qualifications (Education)

- Preferred degree in Electrical or Electronic Engineering.

- BS required, MS or Ph.D. preferred

- The ideal candidate will have 5 years of experience as a member of a Design Verification team

- Experience with successful tapeout of SoC products from verification plan to sign-off including verification plan, reusable test bench development, random-constrained test case creation, RTL/Gate level simulation/debug, code/functional coverage analysis and regression

- Conversant with Verilog, SystemVerilog, Specman, Perl/Python/Tcl scripts, Makefile and EDA tools

- Experience with Assertion or Formal Verification a plus

- Strong communication skills (must be proficient in both spoken and written English)

- Able to travel internationally (to United States and throughout Asia

- Understanding of silicon process technologies (CMOS and Bipolar) and device physics would be a plus.

- Conversant with Verilog-AMS/Verilog-A and Analog Behavior Modeling would be a plus

- Proven analytical skills (application of math and physics to solve problems)

7.
Design Validation Engineer -Shanghai

JOB DESCRIPTION:

-
This position is part of the LSI’s world-leading head-to-host recording system design validation team, and focus on high speed pre-amplifier validation and debug.

-
Set up bench test equipment and perform characterization measurements on high speed(>4GHz) mixed signal IC's, paying careful attention to measurement accuracy and repeatability and test condition coverage

-
Design and layout evaluation PCBs, paying careful attention to high speed signals and board component parasitic

-
Develop automated scripts and program test equipment to automate data collection and report generation. Where automated measurements are not practical, manual data collection is to be performed

-
Work with design and other characterization teams in design verification and characterization and errata corrective action, as well as work with program management, test and product engineering to insure timely delivery of fully verified silicon

-
Support bench application engineers with in-depth customer specific measurements and failure analysis

-
Organize bench data into technical reports for reference and presentation. Presentation of data to both internal and external customers

-
Manage local subcontractors that perform flip chip and board assembly. Work with program management, design, test and product engineering as part of a product support team to insure timely delivery of fully validated silicon.

PREFERRED EXPERIENCE:

-
Investigative and analytical mindset, with a strong interest in electronics and technical work

-
A thorough knowledge of electronic circuits and systems with practical experience in analog and digital electronic circuit design and debug

-
Experience or background with one of the following areas is preferred

a)
Experiences in RF, high-speed connector(SATA, DDR etc), gesture recognition or storage system(HDD, Flash etc) measurement

b)
Experiences in Cadence Allegro HDL(Concept) PCB development. Allegro layout experience is a plus

c)
Developing the automation programming: VBS, Labview & TestStand. IVI driver coding experience is a strong plus

d)
Complete the FPGA design with 200MHz+ data paths before

-
Expertise in applied magnetism and recording a strong plus

-
Good communication skills, especially in technical writing and reporting

8.
ASIC Customer Engineer-Shanghai

Job Description

- LSI Corporation offers an excellent opportunity to contribute to a team environment and to grow personal career path. You will be working with internal and external customers to develop state of the art IC solutions utilizing LSI's leading edge CMOS cell-based ASIC technologies. You will have responsibility for ASIC designs through all of the key development and implementation phases including RTL analysis, synthesis, design optimization, timing verification, simulation, test insertion, physical design, vector generation, and post-prototype test support. Candidates will have opportunity to work on the latest 40nm/28nm designs.

Requirements/Qualifications (Education)

Education: BS/MS Electrical, Computer Engineering or Equivalent

- Candidates have ONE OR MORE good skill sets of the following areas are highly encouraged to apply:

- RTL Analysis/Synthesis/STA: The ideal candidate should have strong skills for the front-end of design

- implementation which includes RTL Analysis, Synthesis Strategies, and STA setup for complex ASIC

- environments. This would include strategies for power management.

- OR

Physical Design Implementation: The ideal candidate should be strong in the Physical Design (at least at block level) which includes floor planning, design closure, & STA. Having strong DRC & LVS skills are a plus.

- Synopsys Astro/ICC experience a plus. Having Mentor Calibre skills a plus.

- OR

- Physical Verification: The ideal candidate should have in-depth understanding of transistor level IC fabrication process, familiar with major foundries(TSMC or SMIC) runsets and verification flow, custom layout experience is a plus, successfully done LVS/DRC/ERC/Antenna check for multiple tapeouts is a strong plus. Understanding of DFM is a plus. Calibre experience is a plus.

- OR

- DFT: The ideal candidate should be strong in all DFT (Design for Test) for all aspects. This would include
- scan/TDF, TestKompress, MEMBIST/BISR, JTAG and etc. Having STA skills is a plus for all aspects of test. Responsible for support / debug of customer designs after delivery of prototypes

9.
Test Engineer-Shanghai-Shanghai

JOB DESCRIPTION:

- To support prototype and production releases of new products. Manage debug of test

program and hardware and meet product release schedules.

- Support test program development for implementing changes in new test methodologies

for test coverage improvement.

- Pursue Design for Test initiatives to optimize testability and achieve test cost reduction via

test time reduction and multiple site test solutions for production release.

- Support test chip test development and characterization of new IP used in LSI products.

PREFERRED EXPERIENCE:

- University graduate students with top scores in GPA

- Prior working experiences in the semiconductor industry field, specially in either IDM,

Fabless, or Foundry environment

- ATE programming skills would be essential

- C++ and/or Perl programming skills

Prefer candidate with analog mixed signal test background

10.
Preamp Analog Mixed Signal Design Engineer-Shanghai

Job Description

- Design high speed analog and mixed-signal integrated circuits within custom chips for the hard disk drive and tape drive industry

- Work directly with customers to determine system requirements, write specifications and guide customers in the use of pre-amplifier products

- Use high speed electronic characterization equipment to evaluate and debug the functionality of the design once the part is fabricated in silicon

- Provide technical leadership through all phases of product development including test, yield, characterization, reliability analysis, qualification and release to manufacturing

Requirements/Qualifications (Education)

- Minimum three years experience in discrete, transistor level analog circuit design

- Experience with analog and mixed signal IC product design, integration and verification is require

- Strong physical layout knowledge and parasitic component understanding essential

- Process and device physics knowledge critical

- Proven skills using electronic measurement equipment in a lab environment

- Expertise in applied magnetism and recording a strong plus

11.
Unix & Cad Tools administrator

JOB DESCRIPTION

In this position, you will be working in IT department in an international corporate as a Unix system administrator and EDA tools support expert. The ideal candidate needs to follow IC design customers work, familiar with the simulation jobs feature, trouble shoot the problems from Cad Tools and ICDS environment. Candidates must have a deep understanding of EDA tools and applications, be clear on the flow of IC design work and the requirement for IT engineering infrustructure in each phase. As a Unix administrator, you will handle day to day support on enterprise NIS/LDAP environment, managing compute farms of ~100 Linux servers, support NFS/CIFS applications on NAS/SAN storage, perform backup and restore activities. You will also work with global team to support both China and other sites, deploying global standards to China. You are expected to work as a bridge between IC design customers and IT support team.

REQUIREMENTS:

- +3 years experience of UNIX and Linux systems administration, strong experience in managing +100 servers with OS provisioning, system paching/upgrade, firmware upgrade etc.

- familiar with NIS/LDAP mixed enterprise environment, NFS/CIFS setup and trouble shooting.

- Understand enterprise NAS/SAN storage architecture and configuration, experience on Netapp/EMC NAS/SAN storage will be an advantage. Hands-on experience on Veritas Netbackup.

- Demonstrable scripting/programming and debugging skills in at least perl and Unix shells.

- experience on LSF or other grid computing systems will be a plus.

- strong knowledge and deep understanding of IC design flow. Hands-on experience with more than one area of mixed-signal design (schematic capture, analog or mixed-signal simulation, custom layout, OVM verification) is highly desired.

- Experience with IC design and simulation tools such as Cadence ADE, Virtuoso, Spectre, AMS, Ultrasim, NCSim.

- experience on Flex License Management.

- Proven Team work and customer oriented. effective communication skills to support local/internal customers and to setup effective working relationships within a global IT organization.

- fluent in written and aural English

12.
Field Application Engineering (FAE)-Shenzhen

Job description

-
Work closely with Sales and customers to provide excellent support for ASIC business.

-
Achieve design wins at customers

-
Support customers on-site when needed.

-
Work closely with global technical colleagues (USA, China) to provide backup support.

-
Track issues and defects and drive to resolution.

-
Provide quick response to key customer’s request on technical support.

-
Provide technical training to Sales team and customers.

Requirements

-
4 years+ of experience with ASIC design/customer silicon solution technical support/ASIC FAE support.

-
Experience in IP foundation/Serdes, DDR etc I/O Memory interface application/Design implementation and development

-
Familiar with Foundation IP/Serial connectivity protocol is a plus

-
Demonstrated ability to learn technology quickly

-
Very good English communication skills

-
Team player, self-motivation

-
Communication/Information Systems/Microelectronics or EE degree, Masters preferred

13.

Sales Account Manager-Shenzhen

Job Description

1. Identify and develop new opportunity as well as manage existing business in global accounts,

implement sales strategies to achieve design win and revenue goals;

2. Aggressively promote LSI networking products to global accounts to drive strategic design wins and build strategic partnership;

3. Communicate with internal team and customer closely to resolve commercial, technical, quality, and delivery issues to satisfy customer expectation;

4. Establish and maintain good relationship with customer R&D, marketing and procurement team;

5. Get visibility on customer market dynamic and manage booking and billing forecast accordingly.

Specific Knowledge/Experience

1. Bachelor Degree at E.E, and M.S. Degree preferred;

2. Good communication skill, good at spoken and written English;

3. Be willing to work aggressively, passionately and diligently to achieve challenging goal;

4. It’s preferred to support Huawei
before.