EETOP 创芯网论坛 (原名:电子顶级开发网)

标题: MMSIM14不能显示瞬态电流 [打印本页]

作者: quantumdot    时间: 2015-4-25 13:15
标题: MMSIM14不能显示瞬态电流
( , 下载次数: 40 )
Cannot display tran current.What's wrong?
作者: amodaman    时间: 2015-4-25 16:57
回复 1# quantumdot


  电路图里面有没有NM0啊?先看一下信号的路径“/NM0/D”对不对,然后看看Output Setup里面有没有保存电流的选项(缺省设置是不保存的)。
作者: quantumdot    时间: 2015-4-25 20:00
回复 2# amodaman
这些设置都是检查过的,spectre 下dc有,ac有,ultrasim下tran有,太奇怪了
作者: 天牛不唱歌    时间: 2015-4-26 09:10
MMSIM14貌似破解的还不完善,我的也有该问题。
作者: amodaman    时间: 2015-4-26 11:11
回复 4# 天牛不唱歌

我的这个版本完全没问题,没发现瞬态电流不能保存。
作者: min4max    时间: 2015-4-26 14:40


   
Cannot display tran current.What's wrong?
quantumdot 发表于 2015-4-25 13:15




    Why are you pairing MMSIM141 with IC54*???  MMSIM141 is a brand new product release in 2014 while IC54* was last updated in 2011 and no update since then.  It could be projected that IC54* is reaching the end of product life and phasing out.  And most importantly, new product releases from Cadence are most probably not tested with IC54*, so they are NOT guaranteed to work with the old IC54*.

So get yourself a IC616 installed!!!

For more info on Cadence products downloading, installing and configuring, see my series tutorials: http://bbs.eetop.cn/thread-479940-1-1.html
作者: quantumdot    时间: 2015-4-26 20:36
回复 6# min4max

谢谢。IC6X 没用过,不知道IC6X是否支持IC51X下的PDK.
作者: AcoAco    时间: 2015-4-27 16:25
回复 7# quantumdot


    PDK需要转换到OA中的格式。使用IC6_转换工具。
作者: quantumdot    时间: 2015-4-27 19:09
回复 8# AcoAco


   先试试看




欢迎光临 EETOP 创芯网论坛 (原名:电子顶级开发网) (https://bbs.eetop.cn/) Powered by Discuz! X3.5