EETOP 创芯网论坛 (原名：电子顶级开发网)

标题: tsmc 130rf pdk [打印本页]

作者: mabas.masood 时间: 2014-3-30 11:56
标题: tsmc 130rf pdk
tsmc 130rf pdk

作者: mabas.masood 时间: 2014-3-30 13:13
本帖最后由 mabas.masood 于 2014-3-30 13:30 编辑

others

作者: moszheng 时间: 2014-3-30 17:41
LZ这全吗？

作者: mabas.masood 时间: 2014-3-30 23:54
本帖最后由 mabas.masood 于 2014-3-31 00:11 编辑

others

作者: mabas.masood 时间: 2014-3-31 00:13
本帖最后由 mabas.masood 于 2014-3-31 00:39 编辑

others

作者: mabas.masood 时间: 2014-3-31 00:40
本帖最后由 mabas.masood 于 2014-3-31 01:31 编辑

others

作者: Accee 时间: 2014-3-31 21:27
人是好人，如果能网盘就更好了。

作者: YULONGUTK 时间: 2014-4-1 02:36
回复 6# mabas.masood

老大有你，EETOP才精彩！

作者: chris2013 时间: 2014-4-1 07:22
thank you

OA or CDB ?

作者: pickpunk 时间: 2014-4-2 09:39
this PDK has been tested to work with the following software  versions:

  Cadence IC 5.10.41_USR2
  Assura sub-version 33.1.4_USR2
  Calibre 6.0.2.119

作者: pickpunk 时间: 2014-4-2 09:41
TSMC 0.13um CMOS Mixed-Signal/RF 1P8M/1P7M/1P6M
         SALICIDE 1.2V/2.5V/3.3V FSG PDK (w/i UTM, w/o UTM)

            TSMC 0.13um CMOS Mixed-Signal 1P5M/1P4M
                     SALICIDE 1.2V/2.5V/3.3V FSG PDK (w/i UTM, w/o UTM)

Version : V1.3b
Doc. #  : T-013-MM-SP-001-K1
Date : July 09, 2007

多谢楼主分享！！

作者: pickpunk 时间: 2014-4-2 09:41
This PDK has been tested to work with the following software versions:

  Cadence IC 5.10.41_USR2
  Assura sub-version 33.1.4_USR2
  Calibre 6.0.2.119

作者: pickpunk 时间: 2014-4-2 09:43
回复 9# chris2013

This PDK requires the following environmental variables:
"CDS_Netlisting_Mode" to be set to "Analog"
"CDSHOME" to be set to Cadence DFII installation path

This PDK has been tested to work with the following software versions:
Cadence IC 5.10.41_USR2
Assura sub-version 33.1.4_USR2
Calibre 6.0.2.119

作者: mabas.masood 时间: 2014-4-2 12:17
回复 9# chris2013

i converted to OA
if you need CDB please tell me to upload CDB version

作者: chris2013 时间: 2014-4-2 18:22
回复 14# mabas.masood

yes i need the CDB version
thanks in advance for your help

作者: chris2013 时间: 2014-4-2 18:27
yes please i need the CDB version
thanks in advance for your help

作者: kevin_h 时间: 2014-4-2 22:27
非常好，谢谢！找了很久了

作者: kevin_h 时间: 2014-4-2 22:30
this PDK has been tested to work with the following software  versions:

Cadence IC       5.10.41_USR2
Assura       sub-version 33.1.4_USR2
Calibre       6.0.2.119

作者: kevin_h 时间: 2014-4-2 23:09
回复 6# mabas.masood

大哥能不能给份design rule 啊？

作者: mabas.masood 时间: 2014-4-3 04:29
回复 15# chris2013

i upload cdb in
http://bbs.eetop.cn/viewthread.php?tid=441386&extra=

作者: rev2012 时间: 2014-4-3 04:46
感谢楼主！

作者: peterlin2010 时间: 2014-4-3 11:25
回复 20# mabas.masood

why

uncompress said ..
(, 下载次数: 147 )

作者: mabas.masood 时间: 2014-4-3 11:46
回复 22# peterlin2010

i extracted without any problem
download 23,24 and 25 again

作者: saiaoying 时间: 2014-4-7 14:26

回复 mabas.masood

why

uncompress said ..
peterlin2010 发表于 2014-4-3 11:25

登录/注册后可看大图

我这里解压也发生同样的问题，不知道楼主如何解决？

作者: mabas.masood 时间: 2014-4-7 15:20
回复 24# saiaoying

exract with linux

作者: pargar 时间: 2014-4-7 15:39
great job man,

作者: saiaoying 时间: 2014-4-7 17:57
回复 25# mabas.masood

1. 之前在windows xp下，用winrar解压，出现如上述问题。

2. 老大能不能好人做到底？请问：用linux的哪个软件？用啥指令来解压？

3. 诚挚感谢！

作者: mabas.masood 时间: 2014-4-7 19:26
回复 27# saiaoying

1- linux system file technology has link file that it is not available in ntfs and fat system. you must not extract linux file in ntfs and fat!!!!
2- you must install unrar in linux
3a- right click in TSMC130_PDK.part001.rar and select extract.
3b- open terminal in tsmc path run this in terminal
unrar x TSMC130_PDK.part001.rar

作者: semico_ljj 时间: 2014-4-8 10:54
nicer!

作者: zlh95222 时间: 2014-4-13 07:29
回复 mabas.masood

楼主有你，EETOP才精彩！

作者: kaikanertan 时间: 2014-4-19 22:03
回复 28# mabas.masood

Hi,mabas.masood

Thank you for pdk.

when I installed the pdk, i had same error like this:

readdir() attempted on invalid dirhandle newADE at pdkInstall.pl line 92.
readdir() attempted on invalid dirhandle newADE at pdkInstall.pl line 107.

can you help? thx again

作者: irisaru_0203 时间: 2014-4-20 22:57
thank you so much

作者: wuxia_1985 时间: 2014-4-21 09:16
多谢楼主分享

作者: tjn_1234 时间: 2014-4-21 15:35
LZ这全吗？

作者: rafei2 时间: 2014-4-22 00:40
Wow, great great.

作者: cdcasanova 时间: 2014-5-5 02:08
支持支持啊

作者: gujm 时间: 2014-6-6 14:52
多谢楼主分享

作者: nidon2003 时间: 2014-7-17 18:52
谢谢LZ啦~下来看看！

作者: dianzi27411 时间: 2014-7-19 23:16
hao dong xi

作者: dawang_han 时间: 2014-8-7 11:25
good thx

作者: myCollins 时间: 2014-8-26 19:50
PDK是模拟的库吗？

作者: xiaoquanic 时间: 2014-9-12 09:02
不错找了很久啊，下了不少.13的数字库。。。

作者: xiaoquanic 时间: 2014-9-12 10:57
不错，ic610，calibre2011可用，文件比较全啊，最近在做低压低功耗.18的库有点小过时了

作者: dhshg 时间: 2014-9-13 17:37
谢谢分享！！！！

作者: lyf7293723 时间: 2014-9-14 13:23
楼主大好人就是包太多了不过夜非常谢谢你~！！！

作者: lyf7293723 时间: 2014-9-14 13:24
楼主大好人就是包太多了不过夜非常谢谢你~！！！

作者: huangjielg 时间: 2014-9-18 22:09
下载，，，，，，

作者: huangjielg 时间: 2014-9-18 22:09
太贵！！！！！！！！！！！

作者: huangjielg 时间: 2014-9-18 22:23
taigui ！！！！

作者: huangjielg 时间: 2014-9-18 22:24
回复，下载，下载回复

作者: huangjielg 时间: 2014-9-18 22:28
马上没钱

作者: huangjielg 时间: 2014-9-18 22:33
阿萨德发射端发射端非4

作者: huangjielg 时间: 2014-9-18 22:38
这么麻烦啊

作者: huangjielg 时间: 2014-9-18 22:39
很快没钱

作者: huangjielg 时间: 2014-9-18 22:39
hen 快没钱了

作者: huangjielg 时间: 2014-9-18 22:40
总帅快完aa

作者: huangjielg 时间: 2014-9-18 22:41
最后一个啊啊

作者: xjqxjq28007 时间: 2014-9-19 15:36
太大个了，

作者: sanshihuang 时间: 2014-9-23 07:27
谢谢同仁们，学一下了哈

作者: beyondcd 时间: 2014-9-23 11:43
非常感谢！！

作者: soelife 时间: 2014-9-24 15:36
PDK是什么

作者: lcblt 时间: 2014-10-12 20:57
好东西，谢谢

作者: jxl1987 时间: 2014-10-13 22:08
回复 1# mabas.masood

楼主，第24个分卷好像有问题啊。解压时报错。偏偏最重要的techfile刚好就在24分卷中，结果解压出来没有techfile，这样无法layout啊。楼主能帮忙解决一下吗？

作者: dler 时间: 2014-10-17 20:41
Convert .cdb libraries to oa (you can use this website as an example)

http://eda.engineering.wustl.edu ... ry_to_an_OA_library

作者: dler 时间: 2014-10-17 21:11
Convert .cdb libraries to oa (you can use this website as an example)
http://eda.engineering.wustl.edu ... ry_to_an_OA_library

作者: dler 时间: 2014-10-17 21:19
Convert .cdb libraries to oa (you can use this website as an example)
eda.engineering.wustl.edu/wiki/index.php/How_to_convert_a_CDB_library_to_an_OA_library

作者: dler 时间: 2014-10-17 21:25
Convert .cdb libraries to oa (you can use this website as an example)
eda.engineering.wustl.edu/wiki/index.php/How_to_convert_a_CDB_library_to_an_OA_library

作者: dler 时间: 2014-10-17 21:30
How to convert a CDB library to an OA library

CDB
Cadence Data Base format
OA
Open Access format (now used in IC 6.1 and later)

To convert a CDB library to an OA library:

First make sure that the DFII library is referenced in a cdb.lib file.
Make a new directory for OA and cd to it.

Next convert the technology library:

cdb2oa -lib <techlib> -cdslibpath <path>

Then convert the library of interest:

cdb2oa -lib <library> -cdslibpath <path>

作者: dler 时间: 2014-10-17 21:34
For example, to convert the NCSU_TechLib_ami06 tech library from IC 5 to IC 6.1 do the following:

Create a temporary directory to work in and change to that directory.

mkdir $HOME/tmp
cd $HOME/tmp

Create directories cdb and oa directories and change directory to the cdb directory.

mkdir cdb
mkdir oa
cd cdb

Create a cds.lib file for the old NCSU_TechLib_ami06 tech library.

vi cds.lib

Enter the following:

DEFINE NCSU_TechLib_ami06 $CDS_SITE_CONFIG/CDK/ncsu-cdk-1.5.1/lib/NCSU_TechLib_ami06

Change directory to the oa directory. This can be done using a relative path.

cd ../oa

Execute cdb2oa to convert the tech library to the Open Access database format.

cdb2oa -lib NCSU_TechLib_ami06 -cdslibpath ../cdb

You should have a message that looks like this.

<--cut-->

********************************************************************************
Finished at: Dec 13 19:45:39 2010

80 cells and 80 cellviews were translated from library 'NCSU_TechLib_ami06' in 114.1s.

********************************************************************************

作者: zhlblaze 时间: 2014-10-23 23:32
楼主大好人。

作者: dler 时间: 2014-10-24 19:10
how to install a PDk on cadence

作者: dler 时间: 2014-10-24 19:33
also i have tsmc 130rf oca type if anybody want it ust message to me

作者: dreamflyings 时间: 2014-10-26 00:24
回复 20# mabas.masood

非常好，谢谢！找了很久了

作者: amirjon 时间: 2014-10-29 21:35
Hi I need TSMC 45nm RF PDK?

作者: gggyvwxf 时间: 2014-10-30 08:45
回复 1# mabas.masood

请问楼主，你分享的这个tsmc0.13的工艺库可以做逻辑综合和静态时序分析吗？？？

作者: cyberspice 时间: 2014-10-31 21:43
多谢楼主，感谢分享。

作者: aliali68 时间: 2014-11-15 12:45
i have "pdkInstall.sh is missing !!!" error
what is it ?
please help me

作者: banye2012 时间: 2014-11-18 14:46
hao ren a

作者: Ryan67 时间: 2014-11-27 00:22
回复 9# chris2013
I think that this DesignKit is OAVisit: http://bbs.eetop.cn/thread-441386-1-1.html

作者: Ryan67 时间: 2014-11-27 00:26
I think that this Kit is OA?

作者: Ryan67 时间: 2014-11-27 04:04
You can convert CDB data to OA
By using cdb2oa tool included in cadence IC 6.1x

作者: dafaa 时间: 2014-12-3 05:27
楼主是不是把某个设计extraction的结果也考上去了？PDK怎么会这么大啊？

作者: Ryan67 时间: 2014-12-4 03:27
Hi, I'm a new user of cadence and I need your help

.
I have a problem in the third step for installing this PDK (TSMC130nm)
When I wrire tsmc13rf_updateCDFs(''TSMC130_PDK'') in CIW of cadence, I get this Error message:
*Error* eval : undefined function - tsmc13rf_updateCDFs
What's the problem? and how to do this step?

作者: Ryan67 时间: 2014-12-4 03:27
回复 1# mabas.masood

Hi, I'm a new user of cadence and I need your help

作者: mabas.masood 时间: 2014-12-4 04:03
本帖最后由 mabas.masood 于 2014-12-4 04:04 编辑

回复 84# Ryan67

add tsmc library directly to cadence path
it is not necessary install this pdk

作者: tuguoping1989 时间: 2014-12-10 15:28
很好，就是包太多了

作者: juzhen 时间: 2014-12-22 23:01
好资料，谢谢上传

作者: iceplanet 时间: 2015-1-3 11:41
谢谢分享

作者: Ryan67 时间: 2015-1-6 02:06
回复 85# mabas.masood

Hi mabas.masood,

I installed the kit TSMC 0.13um PDK, and I got some ERROR and WRNING messages. But the simulation work with this kit and the result are plotted.

Please,can you help me to remove this ERRORs and WARNINGs. this messages are:

ERROR (ADE-5066): Tool 'hspiceS'has not been registered.

ERROR (ADE-5067): Unable toinitialize tool 'hspiceS'; either tool class is not

defined or tool is not registered.

*Error* The default SKILLgeneric function has not been defined for the function"asiEnvGetVar". Ensure that this function is called with the correctargument(s) (tool partition name).

And:

*WARNING* The display packetinformation 'creamshortDash_L' for 'display' was not found.

*WARNING* The display packetinformation 'golddots_S' for 'display' was not found.

*WARNING* The display packetinformation 'orangestipple0_S' for 'display' was not found.

*WARNING* The display packetinformation 'reddot3thickLine' for 'display' was not found.

*WARNING* The display packetinformation 'limecrossthickLine' for 'display' was not found.

*WARNING* The display packetinformation 'creamdot3shortDash' for 'display' was not found.

*WARNING* The display packetinformation 'graydot3thickLine2' for 'display' was not found.

*WARNING* The display packetinformation 'greendot3thickLine' for 'display' was not found.

*WARNING* The display packetinformation 'limedot3thickLine' for 'display' was not found.

*WARNING* The display packetinformation 'yellowdot3thickLine' for 'display' was not found.

*WARNING* The display packetinformation 'cyandot3thickLine' for 'display' was not found.

*WARNING* The display packetinformation 'magentadot3thickLine' for 'display' was not found.

*WARNING* The display packetinformation 'limebrickthickLine' for 'display' was not found.

*WARNING* The display packetinformation 'yellowdaggerthickLine' for 'display' was not found.

*WARNING* The display packetinformation 'magentastipple0thickLine' for 'display' was not found.

*WARNING* The display packetinformation 'limedot3_S' for 'display' was not found.

*WARNING*The display packet information 'pinkbrickdots' for 'display' was not found.

I will appreciate your help?

*WARNIN

ERROR

作者: mixasic 时间: 2015-1-12 18:31
楼主好人，不过下的好辛苦

作者: qq1234 时间: 2015-1-21 21:06
老大有你，EETOP才精彩！

作者: qq1234 时间: 2015-1-21 21:11
老大有你，EETOP才精彩！

作者: qq1234 时间: 2015-1-21 23:45
老大有你，EETOP才精彩！

作者: 10701 时间: 2015-2-8 08:46
as dsa as

作者: 10701 时间: 2015-2-8 09:02
asd asda

作者: 10701 时间: 2015-2-8 09:05
sadasdas d

作者: 10701 时间: 2015-2-8 09:06
re rwe

作者: xiaoquanic 时间: 2015-2-11 09:22
楼主是不是用32位的virtuoso工具转的，我放32能用，换了64的virtuoso就没办法用其中的pcell了，提示有一个文件unit.ixl是32位的，64工具无法读取，无法使用pcell，我下了你的cdb格式的，再用64的virtuoso转一下看看，也有可能是本身pcell库就不支持64的

作者: xiaoquanic 时间: 2015-2-12 20:48
应该是不支持64bitvirtuoso的，是在skill文件中一个PDKunits文件，不是库转换的问题，想使用pcell就只能开32bit的软件了

作者: xiaoquanic 时间: 2015-2-12 20:51
回复 1# mabas.masood

你好我想问下，单元库中有DFM后缀的器件，但是没有供DFM的检查规则文件，还是我没找到？这个库应该是不能进行DFM仿真的吧

欢迎光临 EETOP 创芯网论坛 (原名：电子顶级开发网) (https://bbs.eetop.cn/)