SEMulator3D/MEMulator 2008.101 is a full update release of SEMulator3D 2008, and may be installed on its own or over any previous version of SEMulator3D/MEMulator 2008.
This update includes a new SEMulator3D - Cadence Virtuoso Bridge, an improved Wet Etch capability, improved mesh size controls, a new License Installer, and several bug fixes. SEMulator3D/MEMulator 2008.101 is a cumulative update and includes all new capabilities and fixes from versions 2008.000, 2008.001 and 2008.100. Coventor strongly advises all customers to install this update to benefit from the new enhancements and defect fixes.
Note that if you have a previous version of SEMulator3D/MEMulator 2008 installed and you have installed a local license service, you will need to re-install your license after installing SEMulator3D/MEMulator 2008.101; please see the Installation Instructions for details作者: shiiuen 时间: 2010-12-28 19:22 本帖最后由 shiiuen 于 2011-3-31 18:00 编辑
作者: shiiuen 时间: 2010-12-28 19:24
上传占位作者: rfjungle 时间: 2010-12-28 22:51
i am interested about it作者: aloter 时间: 2010-12-29 01:40 回复 2#shiiuen
Thanks!作者: zxdr56 时间: 2010-12-29 07:01
下载来看看，不知道能不能用作者: yuzhongce 时间: 2010-12-29 07:57
thanks作者: engms 时间: 2010-12-29 13:09
let me see作者: joker48 时间: 2010-12-29 15:49
thanks作者: aloter 时间: 2010-12-29 16:21
shiiuen,
How should we activate it? Do you have a keygen/serial.
It uses FLEXlm
no license, that is why i upload it.作者: snlj 时间: 2010-12-29 22:51
不错，看看。作者: haha000 时间: 2010-12-30 11:51
Thank you作者: 矽阳 时间: 2010-12-31 17:34
How should we activate it? Do you have a keygen/serial.
It uses FLEXlm
In this tutorial you will learn how to crack any type of software protection using
W32Dasm and HIEW.
IDENTIFYING THE PROTECTION:
Run the program, game, etc., (SoftwareX) that you want to crack without the CD in the
CD reader. SoftwareX will not run of course, however, when the error window pops up it
will give you all of the vital information that you need to crack the program, so be sure to
write down what it says.
CRACKING THE PROTECTION:
Now, run Win32Dasm. On the file menu open DISASSEMBLER > OPEN FILE TO
DISASSEMBLE. Select SoftwareX’s executable file in the popup window that will
appear (e.g. SoftwareX.exe). W32Dasm may take several minutes to disassemble the file.
When W32Dasm finishes disassembling the file it will display unrecognizable text; this is
what we want. Click on the String Data References button. Scroll through the String Data
Items until you find SoftwareX’s error message. When you locate it, double click the
error message and then close the window to return to the Win32Dasm text. You will
notice that you have been moved somewhere within the SoftwareX’s check routine; this
is where the error message in generated.
Now comes the difficult part, so be careful. To crack SoftwareX’s protection you must
know the @offset of every call and jump command. Write down every call and jump
@offset number that you see (You have to be sure, that the OPBAR change its used color
to green). You need the number behind the @offset without the “h.”
Now open HIEW, locate SoftwareX’s executable, and press the F4 key. At this point a
popup window will appear with 3 options: Text, Hex, and Decode. Click on “Decode” to
see a list of numbers. Now press the F5 key and enter the number that was extracted using
Win32Dasm. After you have entered the number you will be taken to SoftwareX’s check
routine within HIEW.
If the command that you are taken to is
E92BF9BF74, for example, it means that the command equals 5 bytes. Every 2 digits
equal one byte: E9-2B-F9-BF-74 => 10 digits => 5 bytes. If you understood this then you
can continue.
Press F3 (Edit), this will allow you to edit the 10 digits. Replace the 5 bytes with the
digits 90. In other words, E92BF9BF74 will become 9090909090 (90-90-90-90-90).
After you complete this step press the F10 key to exit.
Congratulations! You just cracked SoftwareX!
Don’t panic if SoftwareX will not run after you finished cracking it. It only means that
something was done incorrectly, or perhaps SoftwareX’s protection technology has been
improved or created after this tutorial. Simply reinstall SoftwareX and start over. If you’re
sure that you completed all steps correctly and the program still will not run, then tough
nuts. Their protection was developed after the writing of this tutorial.
ONE MORE TRICK
Originally Posted by miggittymacdadd
1. Install the software and choose License Type as "Network" while asked.
2. After installation, copy VIZ2007\adlmdll.dll to ...\Autodesk\VIZ2007 and overwrite the original one.
3. Setup Flexlm License Server with the files in the supplied FlexLM directory.
4. Start the inventor, input 2080@your_server_host_name or just point to license.lic while the license is requested.
ONE MORE TRICK!!
Copy \Crack\FlexLM directory to C:\Program Files\Autodesk\
Run "C:\Program Files\Autodesk\FlexLM\lmtools.exe"
Select "Config Services" tab at the top
Click "Browse" on the line "Path to the lmgrd.exe file"
Find the file in C:\Program Files\Autodesk\FlexLM\
Click "Open"
Click "Browse" on the line "Path to the license file"
Find the file in C:\Program Files\Autodesk\FlexLM\
Click "Open"
In the Path to Debug Log file field
Enter "C:\Program Files\Autodesk\FlexLM\Debug.log"
Select "Use Services" and "Start Server at Power Up"
Click "Save Service"
Click "Yes"
Select "Start/Stop/Reread" tab at the top
Click "Start Server"
Select "File" then click "Exit"
Run Autodesk VIZ 2007
Select "Specify the License File"
Click "Next"
Click "Browse"
Find the file in C:\Program Files\Autodesk\FlexLM\
Click "Open"
Click "Next"
Click "Finish"
If the License File can't be found rerun "C:\Program Files\Autodesk\FlexLM\lmtools.exe"
Select "Start/Stop/Reread" tab at the top
Click "Stop Server"
Click "Start Server"
and try running Autodesk VIZ 2007 again
credits - rani tha
Labels: cracking, key generator, software cracking作者: 10780 时间: 2015-11-5 00:05
sad sa作者: 10780 时间: 2015-11-5 00:06
d as das作者: 10780 时间: 2015-11-5 00:07
a sd sad作者: 10780 时间: 2015-11-5 00:07
as d as作者: 10780 时间: 2015-11-5 00:09
as d as作者: 10780 时间: 2015-11-5 00:10
a sd sad作者: yaoguaiws 时间: 2015-11-18 10:53 回复 2#shiiuen
楼主达达，有新一点的版本么？另外，有试用版本的 license 么？
谢谢啦：）作者: dosan0202 时间: 2015-11-24 15:47
好东西，下载看看作者: howgoods 时间: 2018-4-28 13:48 回复 13#shiiuen
你好，安装完后需要license，如何弄？感谢作者: tektycoon 时间: 2018-8-29 08:58
求高人和谐啊作者: Desingman 时间: 2018-11-19 16:11
shiiuen,
How should we activate it? Do you have a keygen/serial.
It uses FLEXlm