EETOP 创芯网论坛 (原名：电子顶级开发网)

标题: 『三味书屋』eetop注册一周年纪念贴 [打印本页]
作者: benemale    时间: 2008-10-26 15:38
标题: 『三味书屋』eetop注册一周年纪念贴
不知不觉，来eetop已经一年了，拍个照留念一下哈，这里估计是国内EE&CS专业类网站人气最高的了。
( , 下载次数: 194 )
作为一名RF工程师，我很happy的和大家天天泡在同一个坛子里，发书，灌水，潜水。。。
但是工作越来越忙，生活也越来越忙，我已经没有太多的时间去找书、整理、发书了。
下面设了权限的内容是我对各个与EE、CS专业相关的出版社的介绍和官方链接，为大家
找资料找书籍节省一些时间，设权限是希望大家为论坛多做贡献，哪怕多灌点水也好。
这贴完了后，我会专注于工作和生活，没啥机会给大家发书了。当然如果有什么新书
大家搞不到，可以pm我，我会尽力帮忙。
谢谢各位一直努力帮我顶贴的兄弟姐妹们，也希望我发的书能对你们有用，祝福你们，eetoper，阿门~~~~~~

[hide=1000] 一、EE&CS专业的相关出版社和数据库
1、Books24x7 —— 美国的数据库，收藏各大出版社各种专业电子书，必须有权限才能浏览，浏览文件格式为html，
浏览过快会弹出警告，3次警告后取消用户权限。与其他数据库的不同点是有Intel Press的书。
http://www.books24x7.com/books24x7.asp
2、Digital Engineering Library —— McGraw-Hill公司的官方数据库，提供html和pdf浏览方式，分章节浏览，
pdf不能使用“右键+目标另存为”方式保存，只能左键浏览，下载完成后再保存。
http://www.digitalengineeringlibrary.com/
3、Ebook Library —— 也是一个综合性电子书库，必须有权限才能浏览，可以整本书下载，但是使用了DRM版权加密，
很难破解。有收录Artech和Cambridge Univ. Press的书。
4、Electrical Engineeringnetbase —— CRC出版社的官方数据库，提供pdf浏览方式，可通过修改网址浏览不同
章节，浏览下载完成后才能点击保存。
http://www.electricalengineeringnetbase.com/
5、Engineering Village(Referex Engineering) —— 工程类综合数据库，收录的多是Elsevier的两三年前的书，
价值不大。
http://www.engineeringvillage2.org.cn/
6、eBrary —— 只能看不能下载的数据库，要安装专用软件才能浏览，书很多，各大出版社都有，目前唯一发现
Charge Pump Circuit Design官方电子版的收录数据库。
http://www.ebrary.com/corp/
7、Informaworld —— Taylor & Francis（CRC旗下的一个出版社）的官方数据库，医学资源较多，也有电子类书籍，
公认的最难搞的数据库之一。
8、IEEE Xplore —— EE CS专业的人应该都知道这个数据库了，无须多介绍。
9、Morgan & Claypool —— 主要出版Computer Architecture、数字电路和电磁场方面的书。
http://www.morganclaypool.com/
10、MyiLibrary和Netlibrary —— 全球最大的两个综合性电子书数据库，Netlib的全库目前接近17万本，提供在线
浏览方式，可保存（要一页一页保存），电子书格式有html、pdf和djvu三种格式。这里收录的Artech和CUP的书最多。
http://www.netlibrary.com
11、Safari Tech Online eBooks —— 主要收录计算机方面的书籍，特色为有Prentice Hall的书，可惜也是只能
在线浏览无法保存。
http://www.safaribooksonline.com/
12、ScienceDirect —— 简称SD，世界最大图书出版社荷兰Elsevier的官方数据库，可以查询。Morgan
Kaufmann是Elsevier旗下的一个子出版社，Newnes也是。
http://www.sciencedirect.com/
http://www.elsevierdirect.com/
13、Springerlink(Kluwer Online/Metapress) —— 德国的Springer不用介绍了吧，把荷兰的Kluwer合并进去了，
官方数据库提供查询功能，很方便。
http://www.springerlink.com/home/main.mpx
http://www.metapress.com/home/main.mpx
14、Wiley
interscience —— 美国的Wiley大家也很熟悉了，官方数据库也提供查询功能，很方便。不过大家也可以
去as.wiley查询，但是那里的书不一定在官方数据库有。
http://www3.interscience.wiley.com/cgi-bin/home
15、World Scientific —— 这是最最最难搞的数据库了，至今没搞到几本。
http://ebooks.worldscinet.com/

二、文献查询
除了去各个数据库查找外，还可以去PUBMED查询，非常全，查到了可以去各个论坛免费求助，一般都有高手帮忙搞定，
不用自己想破脑袋去找代理。
http://www.ncbi.nlm.nih.gov/
http://scholar.google.cn/

三、各种学术论坛
子午学术论坛
红军长征
中国论文网（即将改为SCI.ORG.CN）
愚愚学园
小木虫
鸭绿江医学论坛
零点花园

[ 本帖最后由 benemale 于 2008-10-26 21:27 编辑 ]
作者: benemale    时间: 2008-10-26 15:45
CMOS Analog Circuit Design
by Phillip E. Allen, Douglas R. Holberg, Allen,


                               
登录/注册后可看大图



[size=120%]CMOS Analog Circuit Design
By Phillip E. Allen, Douglas R. Holberg, Allen




Product Description:
After years of anticipation, respected authors Phil Allen and Doug Holberg bring you the second edition of their popular textbook, CMOS Analog Circuit Design. From the forefront of CMOS technology, Phil and Doug have combined their expertise as engineers and academics to present a cutting-edge and effective overview of the principles and techniques for designing circuits. Their two main goals are:
DT to mix the academic and practical viewpoints in a treatment that is neither superficial nor overly detailed and
DT to teach analog integrated circuit design with a hierarchically organized approach.
Most of the techniques and principles presented in the second edition have been taught over the last ten years to industry members. Their needs and questions have greatly shaped the revision process, making this new edition a valuable resource for practicing engineers.
The trademark approach of Phil and Doug's textbook is its design recipes, which take readers step-by-step through the creation of real circuits, explaining complex design problems. The book provides detailed coverage of often-neglected areas and deliberately leaves out bipolar analog circuits, since CMOS is the dominant technology for analog integrated circuit design. Appropriate for advanced undergraduates and graduate students with background knowledge in basic electronics including biasing, modeling, circuit analysis, and frequency response, CMOS Analog Circuit Design, Second Edition, presents a complete picture of design (including modeling, simulation, and testing) and enables readers to design an analog circuit that can be implemented by CMOS technology.
Features
DT Orients the experience of the expert within the perspective of design methodology
DT Identifies common mistakes made by beginning designers
DT Provides problems with each chapter that reinforce and develop student understanding
DT Contains numerous problems that can be used as homework, quiz, or exam problems
DT Includes a new section on switched-capacitor circuits
DT Includes helpful appendices that provide simulation techniques and the following supplemental material:
A brief review of circuit analysis for CMOS analog design
A calculator program for analyzing CMOS circuits
A summary of time-frequency domain relationships for second-order systems


这是html打印版，比论坛上的扫描版应该要清晰点，适合打印。有需要再下。

[ 本帖最后由 benemale 于 2008-10-26 17:26 编辑 ]
作者: benemale    时间: 2008-10-26 15:49
Digital Integrated Circuit Design (The Oxford Series in Electrical and Computer Engineering)
by Ken Martin


                               
登录/注册后可看大图



[size=120%]Digital Integrated Circuit Design (The Oxford Series in Electrical and Computer Engineering)
By Ken Martin




Product Description:
Working from the fundamentals of transistor-level design and building up to system-level considerations, Digital Integrated Circuit Design shows students with minimal background in electronics how to design state-of-the-art high performance digital integrated circuits. Ideal as an upper-level undergraduate text, it can also be used in first-year graduate courses and as a reference for practicing engineers.
Digital Integrated Circuit Design:
Presents transistor-level details first, building up to system considerations
Emphasizes CMOS technology but also includes in-depth explanations of designing in bipolar, BiCMOS, and GaAs technologies
Features modern, well-designed examples and problems
Covers important system-level considerations such as timing, pipelining, clock distribution, and system building blocks in detail
Discusses key elements of semiconductor physics, integrated circuit processing, transistor-level design, logic-level design, system-level design, testing, and more
Provides physical and intuitive explanations throughout
Emphasizes conceptual thinking and design methodology over detailed circuit analysis techniques


也是html打印版，需要再下。

[ 本帖最后由 benemale 于 2008-10-26 17:37 编辑 ]
作者: benemale    时间: 2008-10-26 15:53
Analogue IC Design: The Current-Mode Approach (EII Circuits and Systems Series) (Eii Circuits and Systems Series)
by C. Toumazou F. J. Lidgey


                               
登录/注册后可看大图



[size=120%]Analogue IC Design: The Current-Mode Approach (EII Circuits and Systems Series)
By C. Toumazou, F. J. Lidgey




Product Description:
Analogue IC Design has become the essential book covering the current-mode approach to integrated circuit design. The approach has sparked much interest in analogue electronics and is linked to important advances in integrated circuit technology -- such as CMOS VLSI which allows mixed analogue and digital circuits, and high-speed GaAs processing. The book draws together tutorial contributions from the world's most eminent analogue circuit designers. It is now being republished in paperback as the subject has entered the syllabus of upper level undergraduate courses in electronics and circuit design.


同上，不赘述了。。。

[ 本帖最后由 benemale 于 2008-10-26 18:02 编辑 ]
作者: benemale    时间: 2008-10-26 15:56
本帖最后由 benemale 于 2010-9-2 21:02 编辑

Charge Pump Circuit Design (McGraw-Hill Elctronic Engineering)
by Feng Pan, Tapan Samaddar


                               
登录/注册后可看大图



[size=120%]Charge Pump Circuit Design (McGraw-Hill Elctronic Engineering)
By Feng Pan, Tapan Samaddar




Product Description:
Charge pumps are finding increased attention and diversified usage in the new era of nanometer-generation chips used in different systems. This book explains the different architectures and requirements for an efficient charge pump design and explains each step in detail. It's filled with extra hands-on design information, potential pitfalls to avoid, and practical ideas harnessed from the authors' extensive experience designing charge pumps.


这个不是html了，是一页一页从ebrary抓下来的，所以比较大，适合打印，回贴即送哈。



105MB，分两part

国内链接，7天有效：http://www.91files.com/?P2GL46K9PR9RAICEGM0J
                                    http://www.91files.com/?YS5EDZPGNTFN878F3BOE



国外链接，长期有效：http://ifile.it/oszja0v
                                     http://ifile.it/hvs0ba5



[ 本帖最后由 benemale 于 2008-10-26 20:12 编辑 ]
作者: benemale    时间: 2008-10-26 16:03

                               
登录/注册后可看大图



[size=120%]Tradeoffs and Optimization in Analog CMOS Design
By David Binkley




Product Description:

Analog CMOS integrated circuits are in widespread use for communications, entertainment, multimedia, biomedical, and many other applications that interface with the physical world. Although analog CMOS design is greatly complicated by the design choices of drain current, channel width, and channel length present for every MOS device in a circuit, these design choices afford significant opportunities for optimizing circuit performance. This book addresses tradeoffs and optimization of device and circuit performance for selections of the drain current, inversion coefficient, and channel length, where channel width is implicitly considered. The inversion coefficient is used as a technology independent measure of MOS inversion that permits design freely in weak, moderate, and strong inversion.  This book details the significant performance tradeoffs available in analog CMOS design and guides the designer towards optimum design by describing: Tradeoffs and Optimization in Analog CMOS Design is the first book dedicated to this important topic. It will help practicing analog circuit designers and advanced students of electrical engineering build design intuition, rapidly optimize circuit performance during initial design, and minimize trial-and-error circuit simulations.

这是应jianchongzhou同学所求上传的。

[ 本帖最后由 benemale 于 2008-10-26 18:12 编辑 ]
作者: benemale    时间: 2008-10-26 16:04

                               
登录/注册后可看大图



[size=120%]Signal Integrity and Radiated Emission of High-Speed Digital Systems
By Spartaco Caniggia, Francescaromana Maradei




Product Description:

Before putting digital systems for information technology or telecommunication applications on the market, an essential requirement is to perform tests in order to comply with the limits of radiated emission imposed by the standards. This book provides an investigation into signal integrity (SI) and electromagnetic interference (EMI) problems. Topics such as reflections, crosstalk, switching noise and radiated emission (RE) in high-speed digital systems are covered, which are essential for IT and telecoms applications. The highly important topic of modelling is covered which can reduce costs by enabling simulation data to demonstrate that a product meets design specifications and regulatory limits. According to the new European EMC directive, this can help to avoid the expensive use of large semi-anechoic chambers or open area test sites for radiated emission assessments. Following a short introduction to signalling and radiated interference in digital systems, the book provides a detailed characterization of logic families in terms of static and dynamic characteristic useful for modelling techniques.  Crosstalk in multi-coupled line structures are investigated by analytical, graphical and circuit-based methods, and techniques to mitigate these phenomena are provided. Grounding, filtering and shielding with multilayer PCBs are also examined and design rules given. Signal Integrity and Radiated Emission of High-Speed Digital Systems is a valuable resource to industrial designers of information technology, telecommunication equipment and automation equipment as well as to development engineers. It will also be of interest to managers and designers of consumer electronics, and researchers in electronics.

2009年的新书哈，让大家先睹为快咯~~~

[ 本帖最后由 benemale 于 2008-10-26 19:45 编辑 ]
作者: benemale    时间: 2008-10-26 16:35

                               
登录/注册后可看大图



[size=120%]CMOS RFIC Design Principles (Artech House Microwave Library)
By Robert Caverly




Product Description:

Recently, there has been a major push to integrate circuitry and digital signal processors on a single chip to improve wireless digital transmission. CMOS (complementary metal oxide semiconductor) is a key digital integrated circuit technology that is widely used throughout the wireless communications industry. This practical resource offers comprehensive, expert guidance on designing CMOS RF integrated circuits. Professionals get complete design details on elemental and advanced CMOS RF circuits, from low noise amplifiers, general gain amplifiers, mixers, and oscillators, to voltage controlled oscillators, phase lock loops, frequency synthesizers, and power amplifier architectures. Engineers also find a review of RF system fundamentals and definitions of terms widely used in the field. This accessible reference includes numerous examples that clearly illustrate and support important topics throughout the book. CD-ROM Included! Contains various demonstration and student versions of CAD tools, CAD layouts, and measured RF data on select RFIC circuits.

[ 本帖最后由 benemale 于 2008-10-26 19:52 编辑 ]
作者: benemale    时间: 2008-10-26 16:37

                               
登录/注册后可看大图



[size=120%]FPGA Architecture: Survey and Challenges
By Ian Kuon, Russell Tessier, Jonathan Rose




Product Description:

Field-Programmable Gate Arrays (FPGAs) have become one of the key digital circuit implementation media over the last decade. A crucial part of their creation lies in their architecture, which governs the nature of their programmable logic functionality and their programmable interconnect. FPGA architecture has a dramatic effect on the quality of the final device's speed performance, area efficiency and power consumption. FPGA Architecture: Survey and Challenges reviews the historical development of programmable logic devices, the fundamental programming technologies that the programmability is built on, and then describes the basic understandings gleaned from research on architectures. FPGA Architecture: Survey and Challenges starts with a brief overview of programmable logic to provide a context for the subsequent sections which review the history of programmable logic, and the underlying programming technologies. The following sections define the terminology of FPGA architecture, and then describe foundations and trends of logic block architecture and routing architecture including a discussion of power management techniques and related circuit design issues. A brief overview of the input/output structures and architectural questions in FPGAs is then presented followed by an explicit comparison between FPGAs and competing ASIC standard cell technology. It concludes with a review of some of the design challenges facing FPGAs and a look at emerging architectures for FPGAs. FPGA Architecture: Survey and Challenges is an invaluable reference for engineers and computer scientists. It is also an excellent primer for senior or graduate-level students in electrical engineering or computer science.

[ 本帖最后由 benemale 于 2008-10-26 19:53 编辑 ]
作者: benemale    时间: 2008-10-26 16:39
本帖最后由 benemale 于 2010-9-2 21:03 编辑


                               
登录/注册后可看大图



[size=120%]Frequency-Domain Characterization of Power Distribution Networks (Artech House Microwave Library)
By Istvan Novak, Jason R. Miller




Product Description:

Measure, simulate, and model power distribution networks (PDNs) accurately and efficiently with this new, cutting-edge resource. Frequency-domain analysis has revolutionized component design, and this book shows you, step-by-step, how to accurately characterize PDN components in the frequency domain including vias, bypass capacitors, planes, DC-DC converters and systems. Guiding you through the many alternatives to characterizing PDNs, it helps you to improve accuracy by choosing the right technique and avoiding the common pitfalls. Practical examples point out the strengths and weaknesses of simulation tools as well as explain setting parameters and options. The book presents best practices for measuring that aid you in the selection of calibration processes, instruments, probes, and cables. You learn how to use frequency-domain simulations and measurements to model printed-circuit board elements, including vias, planes, bypass capacitors, inductors, and DC-DC converters. Over 300 illustrations and more than 150 equations support key topics throughout the book.


Summary: Authoritative Book on the Characterization of Power Distribution Networks for Digital Designs
Rating: 5

Power distribution networks are critical to the correct functionality of high performance digital systems. The design of such networks gets harder with the increasing speed of the digital designs they support, in particular, microprocessors. A microprocessor IC consumes an incredible amount of power despite its small physical size and a great amount of work goes into supplying high quality power to that tiny chip. Computers are implemented on boards that combine such power hungry ICs and must feed them simultaneously. This book focuses on the board level power distribution network (as opposed to package and IC).

A successful engineering implementation combines design, analysis, simulation and measurement and this book does a great job in presenting those different aspects of implementation thoroughly and coherently. The reader sees how the different disciplines complement each other in a successful project. The emphasis, however, is on simulation and measurement. I consider that a strength since the other aspects have been treated well in previous publications but this is certainly the most thorough treatment of power distribution network measurement. There is a lot of attention to detail, and one only has to go to the lab to make some measurements to see how some of those details will save you days if not weeks of frustration.

Simulation is used judiciously and for insight as opposed to "blind" verification. The judicious use of simulation may be strongly motivated by the inherent capacity limitations of today's fullwave field solvers, but it also ends up providing valuable intuition to the reader on why as well as the how. The authors have taken great pains to validate their simulation results at every step.

In a field [digital design] dominated by time domain thinking, this book provides a refreshing frequency domain approach. Although it is a difficult leap for most digital designers, it is one worth taking since the additional insights [into the signal integrity implications of frequency domain analysis] could well make the difference between a functional design and one that spends months on the testbench for debugging.

This is a book written not by pure theorists but practitioners of the field and it shows. The authors do not waste much time on hypothetical examples and plunge directly into problems they surely have dealt with themselves as they worked on high performance designs. Although the sections on modeling are rigorous, they are succinct and probably not for people not well trained in the field. But for the expert, this is an invaluable book.



Summary: I was looking for something like this since a long time ago
Rating: 5

I just bought the book, but I was looking for something like this since a long time ago. Until now, there were only articles about a little part of the subject, or just introductions. So, a complete book was really needed about this topic. All the other parts of high-speed digital design was well documented in books already, except this, until now. I think everyone who designs or/and simulates high-speed digital PCBs should read it. High-speed design is not only about interconnect design. Lots of designers just dont care too much about proper power distribution design. They should.


Summary: Frequency Domain Characterization of Power Distr Systems
Rating: 5

This book is must-read, the authors cover a range of very important
topics in a thorough yet practical way. It is an enjoyable read that
takes you through the various aspects within power-distribution systems,
from the basics to very advanced topics. In addition, by reading this
book you are bound to find answers to many PI controversial topics as
well. The chapter about planes is a master-piece. The one about
frequency-domain measurements is comprehensive, filled with a slew of
impressive data and measurement advice. The chapter about
3D-field solver simulations is full of suggestions for engineers trying
to accurately model power-distribution elements, in order to help them
avoid many common (and not so) pitfalls. In summary, this book is a
must-have for any engineer who fully wants to understand how to model,
simulate and measure power-distribution systems. I highly recommend it.

曾经有位朋友向我求这本书，好不容易找到了，希望他能看见。

[ 本帖最后由 benemale 于 2008-10-26 19:58 编辑 ]
作者: benemale    时间: 2008-10-26 16:41
本帖最后由 benemale 于 2010-9-2 21:05 编辑


                               
登录/注册后可看大图



[size=120%]Printed Circuit Board Design Techniques for EMC Compliance: A Handbook for Designers (IEEE Press Series on Electronics Technology)
By Mark I. Montrose




Product Description:

"Electromagnetic compatibility (EMC) is an engineering discipline often identified as "black magic." This belief exists because the fundamental mechanisms on how radio frequency (RF) energy is developed within a printed circuit board (PCB) is not well understood by practicing engineers. Rigorous mathematical analysis is not required to design a PCB. Using basic EMC theory and converting complex concepts into simple analogies helps engineers understand the mitigation process that deters EMC events from occurring.

This user-friendly reference covers a broad spectrum of information never before published, and is as fluid and comprehensive as the first edition. The simplified approach to PCB design and layout is based on real-life experience, training, and knowledge. Printed Circuit Board Techniques for EMC Compliance, Second Edition will help prevent the emission or reception of unwanted RF energy generated by components and interconnects, thus achieving acceptable levels of EMC for electrical equipment. It prepares one for complying with stringent domestic and international regulatory requirements. Also, it teaches how to solve complex problems with a minimal amount of theory and math. Essential topics discussed include:
* Introduction to EMC
* Interconnects and I/O
* PCB basics
* Electrostatic discharge protection
* Bypassing and decoupling
* Backplanes-Ribbon Cables-Daughter Cards
* Clock Circuits-Trace Routing-Terminations
* Miscellaneous design techniques

This rules-driven book-formatted for quick access and cross-reference-is ideal for electrical and EMC engineers, consultants, technicians, and PCB designers regardless of experience or educational background."

Sponsored by:
IEEE Electromagnetic Compatibility Society


Summary: Handy PCB design guidelines
Rating: 4

Most of the signal integrity/high speed circuit books focus on explaining relationship between two conductors, for example, the EM field between a trace and a plane. However, as a practicing engineer, it is impossible and unnecessary to calculate or simulate each trace when designing PCB. This is when this book comes handy. It provides quick design guidelines and rule of thumb without having to worry too much about the underlying theory. Many other reviewers see it as a drawback, but I think this book is pretty practical when used with more theoretical book such as Signal Integrity Simplified.

However, I found some parts of this book are quite difficult to follow as the author might assume that the readers are experience engineers who know all the jargons and theories. For instance, I am confused with chassis ground and system ground. Sometimes the author say should connect chassis to ground, sometimes he said it mustn't. The term "dipole antenna" appears quite often in the book, but it is not clearly explained what it is.

In conclusion, the books give decent PCB layout guidelines to prevent EMC problem. However, it doesn't provide readers the knowledge to do precise analysis and simulation to tackle signal integrity/EMC problems that might arise. I would recommend to get "Signal Integrity Simplified" as a companion book.


Summary: Terrible book
Rating: 1

This book looks perfect on paper. The subject matter is important, it talks about many practical concepts, the cover is cute, etc. But trying to read this book I was very disappointed. The author has just cut and pasted some well-known ideas but doesn't explain anything clearly. Despite knowing the subject I found it painful to follow. I wanted to throw the book away after reading a few sections, but I kept telling myself "it can't be that bad, the material is fine, let me give it another chance". But the book is that bad! It is no excuse that this is a "handbook". There are many books that are not textbooks that do a great job explaining things. I feel sorry for anybody who is trying to learn by reading this book. If you are a beginner read Howard Johnson's classic "Black Magic" book. If you are more advanced read Clayton Paul or books on Microwave design. I donated my book to the city library, but I was very tempted to throw it away to save somebody else from struggling with it.


Summary: OK, but missing something
Rating: 4

So far it has been useful in my designs. They seem to be better and I am sure the book has helped with certification. It has some very useful information. Unfortunatly, it does not have much supporting information or theoretical proofs. Perhaps this helps the non-math oriented user, but I can't imagine why a non-math oriented user would need such a book or what such a person would be doing designing for EMC. As an engineer, I don't take things on face value without understanding of why. The lack of general theory also makes it difficult to extend the information provided to areas not covered in the book. In short, I'd like to know a bit more about why.


Summary: good for a lot of EMC/EMI pains
Rating: 4

I got this book because the boss said to find something to help resolve the FCC/CE and other world EMI/EMC compliance issues we have, and it was instantly used and had the answers we needed. It covers power and grounds, signal integrity, and used with Howard Johnson's book (High Speed Digital Design), gives a strong insight to the PC board layout issues of high speed digital and analog electronics.


html打印版的，牛人Montrose的第二本杰作！

[ 本帖最后由 benemale 于 2008-10-26 20:03 编辑 ]
作者: benemale    时间: 2008-10-26 16:44

                               
登录/注册后可看大图



[size=120%]Building the Power Efficient PC: A Developer's Guide to ACPI Power Management
By Jerzy Kolinski, Ram Chary, Andrew Henroid, Barry Press




Product Description:

Here is the first comprehensive hardware and software engineering guide for designing power-managed PCs. Written by PC experts, this book provides developers and integrators with practical knowledge and design techniques for building PCs that address the increasing demand for energy conservation. With power management, a PC can have lower overall power utilization, automated off-hours maintenance, and an improved end-user experience. Recent regulations and labeling programs mandate tighter restrictions on platform power consumption. PC hardware developers, software programmers, and system integrators must work together to build systems that meet the new power management guidelines. Instead of rehashing specifications, Building the Power-Efficient PC clearly explains how a properly designed system functions during power state transitions and shows you in detail how those transitions can be implemented in the hardware and software. Topics include: In addition, a companion CD-ROM provides all of the latest power management specifications and reference materials to help you design your product.
html打印版，Jason.tschen同学求的书。

[ 本帖最后由 benemale 于 2008-10-26 20:06 编辑 ]
作者: benemale    时间: 2008-10-26 16:51

                               
登录/注册后可看大图



[size=120%]The Intel Safer Computing Initiative
By D. Grawrock



html打印版，需要再下。Intel Press还有很多书，但是没时间搞了。

[ 本帖最后由 benemale 于 2008-10-26 20:09 编辑 ]
作者: benemale    时间: 2008-10-26 20:18
留一层楼来更新吧。。。。。。
作者: seacanoesss    时间: 2008-10-26 20:21
thanks for  you  for one year。
作者: zhaoqin    时间: 2008-10-26 20:25
感谢楼主呀，一年来发了多少好东西
作者: seacanoesss    时间: 2008-10-26 20:27
I will learn to be a RF. Thanks。
作者: sunward    时间: 2008-10-26 20:29
这个楼主是真正的贡献者~我们会努力把论坛一起活跃起来的
作者: seacanoesss    时间: 2008-10-26 20:29
Very good。
作者: jianchongzhou    时间: 2008-10-26 20:30
多谢benemale兄百忙之中帮我找到了这本书
作者: maskc    时间: 2008-10-26 20:39
:lol :lol :lol
作者: jianchongzhou    时间: 2008-10-26 20:51
再次感谢benemale兄, 祝愿你工作生活愉快!
作者: pipiw    时间: 2008-10-26 20:51
你要是不来，论坛繁荣的程度会差很多啊，起码这个板块。呵呵
还是很希望你有时间来逛逛，大家都会很想念你的。当然顺便传一两本书最好了，其实书不在多，那么多看不完也没用，有几本经典的仔细学习和参考就好了，关键还是实践和自己摸索啊。
作者: charlie11    时间: 2008-10-26 20:59
thank you  very much
作者: holmes    时间: 2008-10-26 21:06
额的神，牛人啊。
作者: hainihao    时间: 2008-10-26 21:08
下载了好多书，谢谢分享！祝福……
作者: keenboyee    时间: 2008-10-26 21:10
ddddddddddddd:victory::victory::victory::victory::victory::victory::lol:lol
作者: charlie11    时间: 2008-10-26 21:11
thank you
作者: charlie11    时间: 2008-10-26 21:12
thank you
作者: cmosrf    时间: 2008-10-26 21:14
贺。。。。。。。
作者: charlie11    时间: 2008-10-26 21:16
thank you
作者: jaseper    时间: 2008-10-26 21:24
Thanx for your sharing!
作者: northfish    时间: 2008-10-26 21:31
铁打的营盘流水的兵，祝楼主生活愉快，也祝论坛繁荣兴旺。
作者: charlie11    时间: 2008-10-26 21:33
thank you
作者: charlie11    时间: 2008-10-26 21:39
thank you
作者: liuzhieetop    时间: 2008-10-26 21:42
作者: hainihao    时间: 2008-10-26 21:44
再次感谢benemale辛苦的工作，祝benemale一切顺利，有空到论坛看看……
作者: intercon    时间: 2008-10-26 21:49
yong yuan zhi chi
作者: keroppi    时间: 2008-10-26 21:51
benemale大大  在論壇的貢獻是不可磨滅的     我來此有半年了  在這論壇上受益良多   在此向benemale大大致敬
作者: charlie11    时间: 2008-10-26 21:55
thnaK YOU
作者: charlie11    时间: 2008-10-26 22:06
thank you
作者: charlie11    时间: 2008-10-26 22:07
thank you
作者: keroppi    时间: 2008-10-26 22:14
再這一年中  benemale大大提供了很多很好的資料  對作DRAM設計的我  也獲益良多
作者: keroppi    时间: 2008-10-26 22:20
好東西  多謝了
作者: StateoftheArt    时间: 2008-10-26 22:30
the most wanted "Planar Microwave Engineering" by Thomas Lee of Stanford University




   
原帖由 benemale 于 2008-10-26 15:38 发表

                               
登录/注册后可看大图

不知不觉，来eetop已经一年了，拍个照留念一下哈，这里估计是国内EE&CS专业类网站人气最高的了。
107757
作为一名RF工程师，我很happy的和大家天天泡在同一个坛子里，发书，灌水，潜水。。。
但是工作越来越忙，生 ...

作者: keroppi    时间: 2008-10-26 22:32
感謝樓主大大的分享!
作者: wangjin0215    时间: 2008-10-26 22:33
bucuo,xiexie
作者: keroppi    时间: 2008-10-26 22:52
頂一個
作者: keroppi    时间: 2008-10-26 23:15
感謝分享
作者: flyoxy    时间: 2008-10-26 23:16
非常感谢大佬的贡献，希望还能常来。。
作者: chlliu    时间: 2008-10-26 23:19
真是大牛人，谢谢！
作者: flyoxy    时间: 2008-10-26 23:25
大佬，找这些书是不是属于文献检索技巧？
作者: mature725    时间: 2008-10-26 23:33
我衷心感谢楼主为本版所做出的巨大贡献，为即我们这些初学者提供了如此多的“名著”，同时为我们广大战友省去大把的RMB！
谢谢楼主！
作者: woainio    时间: 2008-10-26 23:48
很速度阿.
作者: telenet123    时间: 2008-10-27 00:09
标题: Thank you very much!!
Thank you very much!!
作者: pjing57    时间: 2008-10-27 00:25
再次感谢楼主啦！从楼主的帖子下了不少好书。
作者: nesta    时间: 2008-10-27 00:31
阿得神啊！
呵呵
作者: nesta    时间: 2008-10-27 00:44
等待大牛年底给我们上传P R GRAY的第五版
作者: libaiqsl    时间: 2008-10-27 02:37
老大很强啊！
作者: alard    时间: 2008-10-27 02:38
感谢楼主！！！！
作者: j55555    时间: 2008-10-27 03:12
太感激了
作者: cooolcoool    时间: 2008-10-27 04:05
zanzanzanzanzanzan
作者: moisten    时间: 2008-10-27 04:57
lao da de jing pin a !!!
作者: moisten    时间: 2008-10-27 06:25
你的书都是精品！！！
作者: moisten    时间: 2008-10-27 06:25
作者: moisten    时间: 2008-10-27 06:27


   
原帖由 benemale 于 2008-10-26 16:03 发表

                               
登录/注册后可看大图


                               
登录/注册后可看大图



Tradeoffs and Optimization in Analog CMOS Design
By David Binkley


Publisher:   Wiley-InterscienceNumber Of Pages:   632Publica ...

找了很久了，这本！
作者: moisten    时间: 2008-10-27 06:33
好！！！！！！！！！！
作者: moisten    时间: 2008-10-27 06:36
感谢大神啊
作者: moisten    时间: 2008-10-27 06:41


   
原帖由 benemale 于 2008-10-26 15:49 发表

                               
登录/注册后可看大图

Digital Integrated Circuit Design (The Oxford Series in Electrical and Computer Engineering)
by Ken Martin  


                               
登录/注册后可看大图



Digital Integrated Circui ...



hao shu!
作者: Jason.tschen    时间: 2008-10-27 07:00
benemale老哥
ㄧ年来
, 您如本论坛的太阳
, 供养无限能量给地上的众生
, 小弟真是感激万分
今您要忙去
, 可记得回来勒
作者: moisten    时间: 2008-10-27 07:05
good!!!!!!!
作者: LAS.xs    时间: 2008-10-27 07:56
ding!
作者: benemale    时间: 2008-10-27 07:59


   
原帖由 lyfztz 于 2008-10-27 06:39 发表

                               
登录/注册后可看大图

我有Books24x7 的帐号



well, just share some intel books with us.....
作者: loveineda    时间: 2008-10-27 08:17
:'(
作者: pipiw    时间: 2008-10-27 09:25
看来大伙都很想你啊，记得长来噢。
作者: sanmo    时间: 2008-10-27 09:30
:lol
作者: mnbvcxz9    时间: 2008-10-27 09:57
怀念LZ啊
作者: whatif    时间: 2008-10-27 10:02
楼主归隐，实乃众网友之一大损失，我辈甚感不舍！
楼主越来越忙，说明功成名就之日不远矣，诚贺之！
作者: xuchhua    时间: 2008-10-27 10:04
楼主牛人啊，怀念。。。。。。。
作者: mnbvcxz9    时间: 2008-10-27 10:06
这一年来LZ奉献了N多宝贝，中国IC产业的进步也有LZ的一份功劳！
作者: lance_cyc    时间: 2008-10-27 10:13
thanks for your contribution here.
作者: kylkzy    时间: 2008-10-27 10:23
yeah, all miss you and hope to see u time to time!
作者: soochowren    时间: 2008-10-27 10:26
不用说，达人的帖子一定是要回的，而且要顶上去
作者: soochowren    时间: 2008-10-27 10:35
达人的帖子，收藏了，
感谢达人提供了这么多的宝贵资源
作者: uopuwe    时间: 2008-10-27 10:38
作者: zweishi    时间: 2008-10-27 10:55
除了去各个数据库查找外，还可以去PUBMED查询，非常全，查到了可以去各个论坛免费求助，一般都有高手帮忙搞定，除了去各个数据库查找外，还可以去PUBMED查询，非常全，查到了可以去各个论坛免费求助，一般都有高手帮忙搞定，
作者: lhyi    时间: 2008-10-27 10:57
Thank you
作者: glenchan    时间: 2008-10-27 11:24
到1000分还有很长的路要走啊，谢谢楼主
作者: xyj107    时间: 2008-10-27 11:38
楼主太强了，佩服
作者: digito77    时间: 2008-10-27 11:42
收過大哥很多書. 一定要感謝您
作者: leonken255    时间: 2008-10-27 11:42
ddddddddddd
作者: andyfan    时间: 2008-10-27 12:08
作者: keqihu    时间: 2008-10-27 12:32
Thanks.
作者: keqihu    时间: 2008-10-27 12:34
Xie Xie.
作者: keqihu    时间: 2008-10-27 12:37
Thanks for sharing.
作者: keqihu    时间: 2008-10-27 12:39
Hao hao.
作者: benemale    时间: 2008-10-27 12:40


   
原帖由 pipiw 于 2008-10-27 09:25 发表

                               
登录/注册后可看大图

看来大伙都很想你啊，记得长来噢。



晕。。。同志们我天天都会来啊。。。只是没时间下载和上传书籍了。。。

大家放心，会有牛人为大家继续更新IC书籍的。。。
作者: nituoshen    时间: 2008-10-27 12:44
谢谢
作者: jfyan    时间: 2008-10-27 12:49
神人!
作者: glenchan    时间: 2008-10-27 13:00
刚才忘了看附件了，再回一次



欢迎光临 EETOP 创芯网论坛 (原名：电子顶级开发网) (https://bbs.eetop.cn/) Powered by Discuz! X3.5