synopsys LEDA在普通用户下无法正常启动

kevin0807 · 发表于 2013-5-22 10:59:19

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

x

本帖最后由 kevin0807 于 2013-5-22 11:01 编辑

LEDA装好后，也定义了环境变量变量，我用的是cshrc，可在普通用户下运行，就报：setenv:Too many arguments，无法正常启动leda，可就在该普通用户下su root，但还是用原普通用户下家目录的cshrc，就可以正常启动，这个问题真奇怪。也没查出问题所在，还烦请各位高手帮忙看看。谢谢！
如下图片：

snk88 · 发表于 2013-5-22 12:13:06

setenv。。。
看起来是环境设置不对，which下看看leda是不是个脚本，适当的修改可以消除此错误

kevin0807 · 发表于 2013-5-22 15:41:16

这个是个脚本，我也看了里面内容，可不知道该修改哪处才能消除此错误，现将该脚本贴出来，请问该如何修改？十分感谢！

#!/bin/csh -f
#set echo
### testing $LEDA_PATH ###
if ( $?LEDA_PATH ) then
set ROOT_PATH = $LEDA_PATH
else if ( $?PROTON_PATH ) then
set ROOT_PATH = $PROTON_PATH
else
echo ""
echo "[ERROR] environment variable LEDA_PATH not defined\!"
exit(1)
endif
set realArg = ""
set set64bit = 0
set run_batch = 0
set tclFound = 0
if ( $?LEDA_RUN_BATCH ) then
set run_batch = 1
endif
## foreach created problems while parsing some strings,so have used while!
## Changes bye Port Team: nsridhar
#foreach arg ($argv:q)
# if ("$arg" == "-full64") then
# set set64bit = 1
# else
# set realArg = ($realArg:q "$arg")
# endif
#end
while ($#argv > 0)
if ("$1:q" == "-full64") then
set set64bit = 1
else if ("$1:q" == "-new_range") then
setenv LEDA_USE_NEW_RANGE
else if (($run_batch == 1) && ("$1:q" == "+tcl_file")) then
set tclFound = 1
else if (($run_batch == 1) && ($tclFound == 1 )) then
set t2b_opts = (`tclsh $LEDA_PATH/bin/t2b.tcl "$1:q"`)
set realArg = ($realArg:q $t2b_opts)
set tclFound = 0
else
set realArg = ($realArg:q "$1:q")
endif
shift
end
if ($run_batch == 1) then
if ( $?PWD ) then
set tmpEFile = "$PWD/tmp_t2b_env.tcl"
if ( -e $tmpEFile) then
source $tmpEFile
rm $tmpEFile
endif
endif
endif
if ($?FULL64) then
set set64bit = 1
endif
# determine which OS to be used
set sys = `uname`
set sys_release = `uname -r`
set mach_release = `uname -m`
switch ($sys)
case SunOS:
if ($mach_release == i86pc) then
set BIN_ROOT = $ROOT_PATH/x86sol32
if ($set64bit == 1) then
set BIN_ROOT = $ROOT_PATH/x86sol64
endif
if ( ! $?LD_LIBRARY_PATH ) then
setenv LD_LIBRARY_PATH $BIN_ROOT/bin
else
setenv LD_LIBRARY_PATH ${BIN_ROOT}/bin:$LD_LIBRARY_PATH
endif
else
switch ($sys_release)
case 5.9:
case 5.10:
set BIN_ROOT = $ROOT_PATH/sparcOS5
if ($set64bit == 1) then
set BIN_ROOT = $ROOT_PATH/sparc64
endif
if ( ! $?LD_LIBRARY_PATH ) then
setenv LD_LIBRARY_PATH $BIN_ROOT/bin
else
setenv LD_LIBRARY_PATH ${BIN_ROOT}/bin:$LD_LIBRARY_PATH
endif
breaksw
default
goto error_Unsupported_platform
breaksw
endsw
endif
breaksw
case HP-UX:
switch ($sys_release)
case *.11.*:
set BIN_ROOT = $ROOT_PATH/hpux11
if ( ! $?SHLIB_PATH ) then
setenv SHLIB_PATH $BIN_ROOT/bin
else
setenv SHLIB_PATH ${BIN_ROOT}/bin:$SHLIB_PATH
endif
breaksw
default
goto error_Unsupported_platform
breaksw
endsw
breaksw
case Linux:
switch ("$mach_release")
case i686:
set BIN_ROOT = $ROOT_PATH/linux
if (-f /etc/SuSE-release) then
set BIN_ROOT = $ROOT_PATH/suse32
endif
breaksw
case x86_64:
set BIN_ROOT = $ROOT_PATH/linux
if (-f /etc/SuSE-release) then
set BIN_ROOT = $ROOT_PATH/suse32
endif
if ($set64bit == 1 || ! -e $BIN_ROOT/bin/leda) then
set BIN_ROOT = $ROOT_PATH/amd64
if (-f /etc/SuSE-release) then
set BIN_ROOT = $ROOT_PATH/suse64
endif
endif
breaksw
default
goto error_Unsupported_platform # make it to point to BIN_ROOT of linux
endsw
if ( ! $?LD_LIBRARY_PATH ) then
setenv LD_LIBRARY_PATH $BIN_ROOT/bin
else
setenv LD_LIBRARY_PATH ${BIN_ROOT}/bin:$LD_LIBRARY_PATH
endif
breaksw
case AIX:
switch ($sys_release)
case 1:
case 3:
if ($?LIBPATH) then
setenv LIBPATH ${LIBPATH}:$ROOT_PATH/rs6000/bin
else
setenv LIBPATH $ROOT_PATH/rs6000/bin
endif
set BIN_ROOT = $ROOT_PATH/rs6000
breaksw
default
goto error_Unsupported_platform
breaksw
endsw
breaksw
default
goto error_Unsupported_platform
breaksw
endsw
### set executables ###
set leda = "$BIN_ROOT/bin/leda "
### test and executables ###
if !( -e $leda) then
echo "[Error] $leda not found \!"
exit(1)
else
if !( -x $leda) then
echo "[Error] $leda : Execute permission denied"
exit(1)
endif
endif
### execute command ###
### use explicitly exec to forbid errors when executing in bg
if ( $?LEDA_RUN_BATCH_PRINT ) then
echo "$leda $realArg:q"
endif
$leda $realArg:q
set leda_status = $status
### tmpFile is for t2b regression, remove it before exit
set tmpFile = "$PWD/tmp_t2b_constrains.tcl"
if ( -e $tmpFile) then
rm $tmpFile
endif
exit($leda_status)
######################################################################
error_Unsupported_platform:
echo ""
echo "[ERROR] $sys $sys_release : Unsupported platform\!"
exit(1)

复制代码

phoenixson · 发表于 2013-5-24 06:21:56

你看一下目录权限把，看是否赋予普通用户合法的权限

hamandu · 发表于 2013-5-24 07:30:25

应该从setenv：too many argument找原因
可能是用户的.cshrc中设置setenv有问题，而root的.cshrc中没有问题

bob_haohao · 发表于 2013-10-23 16:17:20

看看你的leda的安装路径是否有一些不合法的自付，比如空格等

Zhangzheh · 发表于 2017-6-21 09:48:51

。。。

bt6767ak · 发表于 2021-12-8 09:58:08

thanks.

synopsys LEDA在普通用户下无法正常启动

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子

站长推荐 /2