马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。
您需要 登录 才可以下载或查看，没有账号？注册
x
120x180 广告位
虚位以待
非礼勿视
了解详情
HFSS 15.0.2 Service Pack Updates
================================
DE49482: Corrects an error in field computation of fast sweep solutions
DE51733: The correct number of HPC licenses are now checked out when multi-processing is
utilized in an HFSS-IE distributed memory simulation.
DE50650: Matrix convergence definitions will be saved properly when the solution setup is
established by script.
DE46980: Addresses a domain solver hang in designs that incorporate many metallic sheet
IE regions
DE47597: Corrects the far-field calculation when an infinite ground plane is present in a
design that contains a dielectric IE region
DE48956: Fixes erroneous S-parameters that result from including an anisotropic impedance
boundary in a design
DE52269: Corrects a far-field calculation error that occurs in some cases when an infinite
ground plane is present
DE51510: Fixes a mesh read failure that can occur during simulations that use MPI
DE49098: A proper error message is now displayed when computer RAM is depleted during a
domain simulation.
DE47882: Removes an unnecessary validation check in the solver for master/slave faces
in finite array designs
DE50376: Corrects an erroneous far-field result that can arise when an IE radiation
boundary touches a metal surface
DE49069: Fixes an HFSS desktop crash that occurs for some DXF geometry imports
DE49246: Correctly handles edge directions in exporting non-linear geometry in GDSII export
DE49657: Exports elliptical arcs as segments instead of circular arcs to avoid distortion
DE44968: MATLAB optimizations will now operate as expected.
DE48872: Eliminates a hang in the scheduler integration panel for large LSF and SGE
computing clusters
DE49976: Corrects a defect in the ramp color map of 3D plots and field overlay plots that
blackens the plot for certain colors
DE51916: The "Limit number of engines per node to" setting in the job scheduler panel
will now be respected.
DE49692: The proper number of primary sweep points will now appear in data exports of
multi-curve plots.
US64313: Improvements to Large-Scale DSO
- Corrects a data error during result extraction for certain design variations
- Uniform time sampling can now be specified with just the name of the primary sweep
- Traces that are not tied to the state of design will now be ignored | 
/2 
eetop公众号
创芯大讲堂
创芯人才网
发表于 2013-3-9 14:16:08
