IUS58破解不完全，谢谢

appleyuchi2

nclaunch> cd /home/appleyuchi/Cadence
nclaunch> cd /home/appleyuchi/Cadence/Projects_hdl
nclaunch> cd /home/appleyuchi/Cadence/Projects_HDL/INCA_libs
nclaunch> cd /home/appleyuchi/Cadence/IC5141
nclaunch> hal -logfile hal.log -cdslib /home/appleyuchi/Cadence/Projects_HDL/cds.lib /home/appleyuchi/Cadence/Projects_HDL/INCA_libs/add.v /home/appleyuchi/Cadence/Projects_HDL/INCA_libs/add_sim.v  &
nclaunch> hal: 05.81-p002: (c) Copyright 1995-2006 Cadence Design Systems, Inc.
hal: *F,NOLICE: Unable to check out license for Incisive_Verif_Engine (5.8). Run 'lic_error -12' for details.

我终端运行lic——error -12后，出现如下：
ERROR (LM -12): unable to contact license server - check network

The client cannot connect to the license server. If lmstat indicates the
daemons are running, this error message can indicate that the network
is not working properly.

1. Verify that the lmgrd daemon is running.

   For Unix systems:
   =================

   Log into the license server and type the appropriate command.

   Platform                Command
   --------                -------
   HP Series 700           ps -edaf | grep lmgrd | grep -v grep
   IBM RS/6000             ps waux  | grep lmgrd | grep -v grep
   Solaris                 ps -waux | grep lmgrd | grep -v grep
                           ps -edaf | grep lmgrd | grep -v grep
   SunOS 4.1.3             ps -waux | grep lmgrd | grep -v grep

   The system should return a lmgrd process. If nothing is returned,
   the license manager daemon is not running.


   For Windows NT:
   ===============

   Use Task Manager to check if lmgrd.exe is running. To run Task
   Manager, right-click on the toolbar, then click Task Manager.
   and then click the Processes tab.

   If the correct license daemon is not running, check the messages in
   the debug log file. Respond to the error messages. If cdslmd is not
   running, see "Daemons are not Running" section in the 'Software
   Installation and License Management Reference' in OpenBook.

2. Verify that the cdslmd license daemon is running.

   Replace lmgrd with cdslmd in the command listed above. The system
   should return a cdslmd process. If cdslmd is not running, see "Daemons
   are not Running" section in the 'Software Installation and License
   Management Reference.'

3. If the license server is a UNIX system, use telnet to verify TCP/IP
   (the client can reach the license server).

   Platform         Command
   --------         -------
   HP Series 700    /usr/bin/telnet <hostname>
   Others           /usr/ucb/telnet <hostname>

   Use the host name listed in the license file. A UNIX license server
   must be able to telnet itself. Type Control-d to exit from telnet.
   
   Note: Do not use ping. It does not adequately ensure that the client
   can reach the license server.  If you are not using .rhosts and you
   are prompted for a password on hostname, the network is configured
   correctly.
   
   If connection to the license server cannot be established, the network
   is not configured correctly. See your operating system documentation.

4. Verify that the host name of the license server is correct on the
   first line of the license file. The host name is case-sensitive.

5. If the network is busy frequently, consider increasing the timeout
   value.

   -  Increase the timeout between the license server and the application
      client with CDS_LIC_TIMEOUT.  The default timeout is ten seconds.

      Platform            Command
      --------            -------
      UNIX              setenv CDS_LIC_TIMEOUT <seconds>
      Windows          set CDS_LIC_TIMEOUT=<seconds>

   -  For fault-tolerant license servers, increase the timeout between
      the license servers by starting the license daemons with the -t
      option. The default timeout is ten seconds. To increase the timeout,
      follow these steps:

      o Modify the startup file, rc.lic, to specify the -t option of
        lmgrd. Refer to the "lmgrd" man page or the lmgrd description in
        the 'Software Installation and License Management Reference' in
        OpenBook for more information.

      o Restart the daemons.  See the "Restarting the License Daemons"
        section in the 'Software Installation and License Management
        Reference' in OpenBook for more information.
怎么办啊？IUS58无法破解完全啊，谢谢～

appleyuchi2

然后我换用了IUS92的license

appleyuchi2

出现如下结果
麻烦各位给看下，谢谢大神们～～

appleyuchi2

怎么解决呢？谢谢

niuniu4

setenv FLEXLM_DIAGNOSTICS 2
run the program and see which feature is missing, then add to the license file.

appleyuchi2

回复 5# niuniu4
我的是bash shell，应该怎么办呢？谢谢

bwq

谢谢分享经验

DeepTHought

which cadene product is this software for?

Andy126