MDK又升级到4.23了

yon-gjun

                               
登录/注册后可看大图

Microcontroller Development Kit - Version 4.23

• [arm Processor Support]
  • Updated: includes the RealView Compilation Tools version 4.1.0.894 .
• [New Supported Devices]
  • Analog Devices
    ADuC7124 and ADuC7126.
  • Fujitsu
    MB9BF116S, MB9BF116T, MB9BF117S, MB9BF117T, MB9BF118S, MB9BF118T,
    MB9BF216S, MB9BF216T, MB9BF217S, MB9BF217T, MB9BF218S, MB9BF218T,
    MB9BF316S, MB9BF316T, MB9BF317S, MB9BF317T, MB9BF318S, MB9BF318T,
    MB9BF416S, MB9BF416T, MB9BF417S, MB9BF417T, MB9BF418S, MB9BF418T,
    MB9BF516S, MB9BF516T, MB9BF517S, MB9BF517T, MB9BF518S, MB9BF518T,
    MB9BF616S, MB9BF616T, MB9BF617S, MB9BF617T, MB9BF618S, and MB9BF618T.
  • Nuvoton
    Mini51LAN, Mini51ZAN, Mini52LAN, Mini52ZAN, Mini54LAN, and Mini54ZAN.
  • ST
    STM32L152VD, STM32L152ZD, STM32L162VD, and STM32L162ZD.
  • Toshiba
    TMPM342FYXBG.
• [Device support]
  • [CMSIS support]
    • ARM
      • Added: support for Cortex-M0 System Design Kit (CMSDK), in folder ..\ARM\INC\ARM\ and ..\ARM\Startup\ARM\.
    • Fujitsu
      • Added: support for MB9B610 device series, in folders ..\ARM\INC\Fujitsu\MB9B610\ and ..\ARM\Startup\Fujitsu\MB9B610\.
    • Milandr
      • Added: support for MDR32F9x device series, in folders ..\ARM\INC\Milandr\MDR32F9x\ and ..\ARM\Startup\Milandr\MDR32F9x\.
    • Nuvoton
      • Added: support for Mini51 device series, in folders ..\ARM\INC\Nuvoton\Mini51\ and ..\ARM\Startup\Nuvoton\Mini51\.
    • NXP
      • Updated: support for LPC18xx devices to version V1.0 in folders in folders ..\ARM\INC\NXP\LPC18xx\ and ..\ARM\Startup\NXP\LPC18xx\.
      • Added: support for LPC43xx device series, in folders in folders ..\ARM\INC\NXP\LPC43xx\ and ..\ARM\Startup\NXP\LPC43xx\.
    • ST
      • Added: support for STM32L152VD and STM32L152VD devices, in folders ..\ARM\INC\ST\STM32L1xx\ and ..\ARM\Startup\ST\STM32L1xx\.
    • Toshiba
      • Added: support for TMPM342 device series, in folders ..\ARM\INC\Toshiba\TMPM342\ and ..\ARM\Startup\Toshiba\TMPM342\.
  • [Flash programming]
    • Freescale
      • Added: flash programming algorithms for Kinetis K70 device series, in folder ..\ARM\FLASH\MKXXX\.
    • Fujitsu
      • Added: flash programming algorithms for MB9BF610 device series, in folder ..\ARM\FLASH\MB9BFxxxx\.
    • Milandr
      • Added: flash programming algorithms for MDR32F9x device series, in folder ..\ARM\FLASH\MDR32F9x\.
    • Nuvoton
      • Added: flash programming algorithms for Mini51 device series, in folder ..\ARM\FLASH\Mini51\.
      • Updated: flash programming algorithms for NU_M05x device series, in folder ..\ARM\FLASH\NU_M05x\.
      • Updated: flash programming algorithms for NUC1xx device series, in folder ..\ARM\FLASH\NUC1xx\.
    • ST
      • Added: flash programming algorithms for STM32L162xx device series, in folder ..\ARM\FLASH\STM32L1xx\.
    • Toshiba
      • Added: flash programming algorithms for TMPM342xx device series, in folder ..\ARM\FLASH\TMPM342\.
  • [SystemViewer support]
    • Analog Devices
      • Added: descriptions for ADuC7023, ADuC7124, and ADuC7126 devices, in folder ..\ARM\SFD\ADI\.
    • Atmel
      • Updated: descriptions for SAM3N device series, in folder ..\ARM\SFD\Atmel\SAM3N\.
      • Added: descriptions for SAM3S device series, in folder ..\ARM\SFD\Atmel\SAM3S\.
      • Updated: descriptions for SAM3U device series, in folder ..\ARM\SFD\Atmel\SAM3U\.
    • Fujitsu
      • Added: descriptions for MB9B110 device series, in folder ..\ARM\SFD\Fujitsu\MB9B110\.
      • Added: descriptions for MB9B210 device series, in folder ..\ARM\SFD\Fujitsu\MB9B210\.
      • Added: descriptions for MB9B310 device series, in folder ..\ARM\SFD\Fujitsu\MB9B310\.
      • Added: descriptions for MB9B410 device series, in folder ..\ARM\SFD\Fujitsu\MB9B410\.
      • Added: descriptions for MB9B510 device series, in folder ..\ARM\SFD\Fujitsu\MB9B510\.
      • Added: descriptions for MB9B610 device series, in folder ..\ARM\SFD\Fujitsu\MB9B610\.
    • NXP
      • Added: descriptions for LPC318x device series, in folder ..\ARM\SFD\NXP\LPC318x\.
      • Added: descriptions for LPC43xx device series, in folder ..\ARM\SFD\NXP\LPC43xx\.
    • ST
      • Updated: descriptions for STM32F1xx device series, in folder ..\ARM\SFD\ST\STM32F2xx.
      • Updated: descriptions for STM32F2xx device series, in folder ..\ARM\SFD\ST\STM32F2xx\.
      • Updated: descriptions for STM32L15x device series, in folder ..\ARM\SFD\ST\STM32L15x\.
    • Toshiba
      • Added: descriptions for TMPM342 device series, in folder ..\ARM\SFD\Toshiba\.
      • Added: descriptions for TMPM369 device series, in folder ..\ARM\SFD\Toshiba\.
• [Peripheral Simulation]
  • Added: simulation for GPIO, System Control, Timer, Dual Timer, UART, Watchdog, and PL230 μDMA peripherals which are part of the Cortex-M0 System Design Kit (CMSDK).
  • Corrected: the LPC1788 I/O configuration dialog for pin 4.28.
• [μVision Debugger]
  • Added: μVision Plug-in for Eclipse to facilitate debugging of μVision projects or executable object files using the Eclipse interface.
    The Plug-in can be found in folder ..\Eclipse\ under the ..\Keil\ installation directory.
    Detailed informations about the current Plug-in are included in the ..\Hlp\ecluv.chm MDK-ARM Plug-in manual.
• [Board support]
  • ARM
    • Added: Demo example for Cortex-M0 System Design Kit (CMSDK) board, in folder ..\ARM\Boards\ARM\Cortex-M0 SDK\.
  • Analog Devices
    • Added: CBlinky example for ADI ADuC7124 board, based on ADuC7124 device, in folder ..\ARM\Boards\ADI\ADuC7124\.
  • Freescale
    • Added: Blinky, RTX_Blinky, and Blinky_ULp examples for Freescale TWR-K70FN1M board, based on MK70FN1M0xxx12 device, in folder ..\ARM\Boards\Freescale\TWR-K70FN1M\.
  • Keil
    • Added: Blinky, Blinky_ULp, RTX_Blinky and Demo examples for Keil MCBSTM32F400 board, based on STM32F407IG device, in folder ..\ARM\Boards\Keil\MCBSTM32F400\.
  • Nuvoton
    • Added: examples for Nuvoton NuTiny-EVB_M051 board, based on M0516LAN device, in folder ..\ARM\Boards\Nuvoton\NuTiny-EVB_M051\.
    • Added: examples for Nuvoton NuTiny-EVB_NUC120 board, based on NUC120LE3AN device, in folder ..\ARM\Boards\Nuvoton\NuTiny-EVB_NUC120\.
    • Added: examples for Nuvoton NuTiny-EVB_NUC122 board, based on NUC122LD2AN device, in folder ..\ARM\Boards\Nuvoton\NuTiny-EVB_NUC122\.
  • SILICA
    • Added: Blinky example for SILICA Xynergy board, based on STM32F217IG device, in folder ..\ARM\Boards\SILICA\Xynergy\.
  • ST
    • Added: Blinky, Blinky_ULp and RTX_Blinky examples for STM3240G-EVAL board, based on STM32F407G device, in folder ..\ARM\Boards\ST\STM3240G-EVAL\.
  • Toshiba
    • Added: Blinky, Blinky_ULp and RTX_Blinky examples for Toshiba BMSKTOPASM369 board, based on TMPM369FDFG device, in folder ..\ARM\Boards\Toshiba\BMSKTOPASM369\.
• [Middleware]
  • [ARM Middleware]
    • [CAN]
      • Added: CAN_Ex1 example for Keil MCBSTM32F400 evaluation board. The example can be found in ..\ARM\Boards\Keil\MCBSTM32F400\RL\CAN folder.
      • Added: CAN_Ex1 example for ST STM3240G-EVAL evaluation board. The example can be found in ..\ARM\Boards\ST\STM3240G-EVAL\RL\CAN folder.
    • [FlashFS]
      • Optimized: file handling in Embedded File System. The file access on drives with a lot of small files, or high fragmentation, is now much faster.
      • Added: support for Cortex-M1 devices. Libraries FS_CM1.lib with FAT Long File Name support and FSN_CM1.lib without FAT LFN support have been added.
      • Added: FlashFS SD_File example for Freescale TWR-K60N512 board in folder ..\ARM\Boards\Keil\TWR-K60N512\RL\FlashFS\.
      • Added: FlashFS SD_File and NAND_File examples for Keil MCBSTM32F400 board in folder ..\ARM\Boards\Keil\MCBSTM32F400\RL\FlashFS\.
      • Added: FlashFS SD_File example for SILICA Xynergy board in folder ..\ARM\Boards\SILICA\Xynergy\RL\FlashFS\SD_File.
      • Added: FlashFS SD_File example for ST STM3240G-EVAL board in folder ..\ARM\Boards\ST\STM3240G-EVAL\RL\FlashFS\SD_File.
    • [TCPnet]
      • Added: support for IGMP version 2. Both versions IGMPv1 and IGMPv2 are fully supported.
      • Added: configurable Maximum Segment Size (MSS) option in TCP socket.
      • Added: an ioctlsocket function in BSD socket interface. It allows to set the socket mode to blocking or non-blocking mode.
      • Added: a Disable Echo option in Telnet server.
      • Added: an AutoIP support in DHCP client. If DHCP fails, a free IP address in the network 169.254.0.0/16 is automatically assigned. The netmask is 255.255.0.0
      • Added: TCPnet examples for Keil MCBSTM32F400 evaluation board. The examples can be found in ..\ARM\Boards\Keil\MCBSTM32F400\RL\TCPnet folder.
      • Added: TCPnet examples for SILICA Xynergy evaluation board. The examples can be found in ..\ARM\Boards\SILICA\Xynergy\RL\TCPnet folder.
      • Added: TCPnet examples for ST STM3240G-EVAL evaluation board. The examples can be found in ..\ARM\Boards\ST\STM3240G-EVAL\RL\TCPnet folder.
      • Corrected: the IP Don't fragment flag is now set for outgoing TCP packets only.
      • Corrected: a send function problem in BSD socket interface. When the data length is too large for one packet, the send function might send invalid number of bytes.
      • Corrected: a recv function problem in BSD socket interface. If the remote host has closed the connection, the remaining data still queued for the socket was lost.
      • Corrected: potential memory corruption in BSD socket interface when received packets were queued for SOCK_DGRAM socket type.
    • [USB Device and USB Host]
      • Added: Support for HID multipacket and multireport transfers and idle time handling.
      • Added: USB Host and USB Device examples for Freescale TWR-K60N512 evaluation board. The examples can be found in ..\ARM\Boards\Freescale\TWR-K60N512\RL\USB folder.
      • Added: USB Host and USB Device examples for Keil MCBSTM32F400 evaluation board. The examples can be found in ..\ARM\Boards\Keil\MCBSTM32F400\RL\USB folder.
      • Added: USB Host and USB Device examples for SILICA Xynergy evaluation board. The examples can be found in ..\ARM\Boards\SILICA\Xynergy\RL\USB folder.
      • Added: USB Host and USB Device examples for ST STM3240G-EVAL evaluation board. The examples can be found in ..\ARM\Boards\ST\STM3240G-EVAL\RL\USB folder.
      • Corrected: Eject feature of Mass storage.
      • Updated: HID_Client example to work in a non-blocking mode. The example can be found in ..\ARM\Utilities\HID_Client folder.
  • [Segger Graphic Library]
    • Added: Segger emWin graphic library version 5.12i in folder ..\ARM\Segger\emWin\.
    • Added: GUIDemo, Template, and Template_RTX examples for Keil MCB1700 evaluation board. The examples can be found in ..\ARM\Boards\Keil\MCB1700\emWin\ folder.
    • Added: GUIDemo, Template, and Template_RTX examples for Keil MCB2929 evaluation board. The examples can be found in ..\ARM\Boards\Keil\MCB2929\emWin\ folder.
    • Added: GUIDemo, Template, and Template_RTX examples for Keil MCBSTM32C evaluation board. The examples can be found in ..\ARM\Boards\Keil\MCBSTM32C\emWin\ folder.
    • Added: GUIDemo, Template, and Template_RTX examples for Keil MCBSTM32E evaluation board. The examples can be found in ..\ARM\Boards\Keil\MCBSTM32E\emWin\ folder.
    • Added: GUIDemo, Template, and Template_RTX examples for Keil MCBSTM32F200 evaluation board. The examples can be found in ..\ARM\Boards\Keil\MCBSTM32F200\emWin\ folder.
    • Added: GUIDemo, Template, and Template_RTX examples for Keil MCBSTM32F400 evaluation board. The examples can be found in ..\ARM\Boards\Keil\MCBSTM32F400\emWin\ folder.
    • Detailed informations about the current graphic library are included in the emWin release notes .
• [Target debugging]
  • Updated: Segger J-Link driver for ARM devices to version 4.36l.
  • Updated: debug driver lmidk-agdi.dll for TI Stellaris and FTDI In-Ciruit debug interface to version 159.0.0.0.
• [μVision]
  • This MDK release comes with μVision V4.23.00.

kjkld

多谢喽主介绍~~

spritez

升级很快呀，谢谢楼主。。。。。

hendrix

这东西能在linux下用吗

jisay

like168

谢谢楼主的信息分享

david94168

哇!真好真好~
多謝樓主囉~

sj-1022

能下载吗