VCS图形界面（gui）启动问题

白兴金 · 发表于 2014-10-6 20:31:32

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

x

大家好：请问我用一下命令启动VCS图形界面root@thankpad-ThinkPad-E420:/vcs# vcs –v /vcs/add4.v /vcs/addd8.v /vcs/fa.v vcs/addertb.v –debug_all –R –gui
提示如下错误：This program is proprietary and confidential information of Synopsys Inc.
and may be used and disclosed only as authorized in a license agreement
controlling such use and disclosure.

Error-[SFCOR] Source file cannot be opened
  Source file "–v" cannot be opened for reading due to 'No such file or
  directory'.
  Please fix above issue and compile again.
如果改用如下命令：oot@thankpad-ThinkPad-E420:/vcs# vcs /vcs/add4.v /vcs/addd8.v /vcs/fa.v vcs/addertb.v –debug_all –R –gui（去掉了-V）提示：Error-[SFCOR] Source file cannot be opened
  Source file "/vcs/add8.v" cannot be opened for reading due to 'No such file
  or directory'.
  Please fix above issue and compile again.
  "/vcs/add4.v", 15
但是那个路径下确实存在add8等文件啊！
有时还提示-R,-gui不存在，

最后就是如果使用dve&，dve可以成功启动！
谢谢啦！

phoenixson · 发表于 2014-10-7 08:49:58

-v is invalid

白兴金 · 发表于 2014-10-7 13:40:10

回复 2# phoenixson VCS还提示ERROR : Failed to execute /usr/synopsys/vcs/VMS/admin/install.sh
ERROR :
Start VMS/admin/install.sh
untar var.tar.gz ...
untar samples.tar.gz ...
setting synopsys_rman.setup ...
Platform linux dependent code found
chmod: 无法访问"var": 没有那个文件或目录